Any use of this information falls under the rules of our
disclaimer.
Processing/Physical Characteristics | 値 | 単位 | テスト基準 |
Other Standards[S] |
成形収縮率, 平行 |
0.4 |
% |
DIN 16901 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
機械的特性 | 値 | 単位 | テスト基準 |
ISO データ |
引張弾性率 |
3000 |
MPa |
ISO 527 |
引張強度 |
67 |
MPa |
ISO 527 |
シャルピー衝撃強さ, +23°C |
74 |
kJ/m² |
ISO 179/1eU |
熱的特性 | 値 | 単位 | テスト基準 |
ISO データ |
荷重たわみ温度, 1.80 MPa |
90 |
°C |
ISO 75-1/-2 |
Other Standards[S] |
線膨張係数, 平行 |
5 |
E-6/K |
DIN 53752 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
電気的特性. | 値 | 単位 | テスト基準 |
ISO データ |
表面抵抗率 |
1E12 |
Ohm |
IEC 62631-3-2 |
その他の特性. | 値 | 単位 | テスト基準 |
密度. |
1200 |
kg/m³ |
ISO 1183 |
Processing Recommendation Extrusion | 値 | 単位 | テスト基準 |
Pre-drying - Temperature |
130 |
°C |
- |
Pre-drying - Time |
6 - 8 |
h |
- |
樹脂温度 |
280 |
°C |
- |
Zone 1 |
260 - 300 |
°C |
- |
Zone 2 |
260 - 300 |
°C |
- |
Zone 3 |
260 - 300 |
°C |
- |
Nozzle temperature |
250 - 290 |
°C |
- |
特殊な特性
成形加工法.
その他の押出成形., Additive Manufacturing
納入形状.
ペレット., 黒
特殊な特性.
熱安定化.
アプリケーション
自動車, Filament for 3D Printing
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com