Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ FR Resin JK2500 - (PC+ABS)-CF20 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ FR Resin JK2500:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
LEXAN JK2500 compound is based on Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend containing 20% carbon fiber. Added features of this grade include: Electrically Conductive, EMI/RFI Shielding Effectiveness of 21 dB at 1.5 mm, Non-Brominated, Non-Chlorinated Flame Retardant.

UL Yellow Card Link E207780-228503
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 25 g/10min ASTM D 1238
温度 300 °C -
荷重 1.2 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 11100 MPa ISO 527
降伏応力 63 MPa ISO 527
降伏ひずみ 2.2 % ISO 527
破壊応力 63 MPa ISO 527
破壊ひずみ 2.3 % ISO 527
曲げ弾性率 10100 MPa ISO 178
Izod impact strength, +23°C, 4mm 15 kJ/m² ISO 180/1U
ノッチ付きアイゾット衝撃強さ, +23°C, 4mm 5 kJ/m² ISO 180/1A
ASTM数据
引張弾性率 11030 MPa ASTM D 638
降伏応力 63 MPa ASTM D 638
破壊応力 63 MPa ASTM D 638
降伏点伸び 2.3 % ASTM D 638
破断伸び 2.4 % ASTM D 638
曲げ弾性率 9230 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 53 J/m ASTM D 256
アイゾット衝撃試験, 1/8 in 224 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
ビカット軟化温度, 120°C/h 50N 100 °C ISO 306
厚さhでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 1.0 mm -
ASTM数据
DTUL @ 66 psi 98 °C ASTM D 648
DTUL @ 264 psi 93 °C ASTM D 648
ビカット軟化温度 111 °C ASTM D 1525
電気的特性.値単位テスト基準
ASTM数据
表面抵抗率 10000 Ohm ASTM D 257
体積抵抗率 100 Ohm*cm ASTM D 257
その他の特性.値単位テスト基準
密度 1310 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 80 - 90 °C -
Pre-drying - Time 3 - 4 h -
樹脂温度 270 - 310 °C -
金型温度 50 - 95 °C -
Zone 1 260 - 275 °C -
Zone 2 270 - 290 °C -
Zone 3 270 - 300 °C -
Screw speed 35 - 75 rpm -
Back pressure 0.3 - 0.7 MPa -
特殊な特性
成形加工法.
射出成形.
添加剤.
難燃剤.
特殊な特性.
導電., 難燃.
な特性
EMI Attenuation/Shielding
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.