Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of KOSTIL® B 366(1) - SAN - Versalis S.p.A

Material Data Center offers the following functions for KOSTIL® B 366(1):
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Kostil datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 試験片の成形条件. - 機能
Any use of this information falls under the rules of our disclaimer.
商品の説明文

Symbol according to ISO 1043-1: SAN

Designation: Thermoplastics ISO 4894-SAN 2,MRS,105-25

Kostil B 366 is a Styrene-Acrylonitrile copolymer with a good chemical resistance and a very low residual monomers content.

This easy flow grade exhibits a high clarity and it is designed for the moulding of items with complex shapes and/or with thin walls with fast cycles.

Kostil B 366 is recommended for injection moulding.


Applications:

Lighting, bathroom furnishing, catering (cups, trays), stationery, toys, displays.

Cosmetic, medical and pharmaceutical items.

Kostil B 366 is available in some standard transparent colours (2000, 2005, 2030, 2050).

It can also be supplied, on request, in other transparent or opaque shades and/or in UV stabilised versions and be delivered in those cases in cylindrical pellets under the name Kostil B 361.

Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 30 cm³/10min ISO 1133
温度 220 °C -
荷重 10 kg -
溶融時の密度 990 kg/m³ -
溶融時の比熱 2150 J/(kg K) -
機械的特性値単位テスト基準
ISO データ
引張弾性率 3450 MPa ISO 527
破壊応力 65 MPa ISO 527
破壊ひずみ 2.2 % ISO 527
シャルピー衝撃強さ, +23°C 14 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C 14 kJ/m² ISO 179/1eU
熱的特性値単位テスト基準
ISO データ
ガラス転移点, 10°C/min 105 °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 86 °C ISO 75-1/-2
ビカット軟化温度, B 105 °C ISO 306
線膨張係数, 平行 70 E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.5 mm -
Yellow Card 可用 はい - -
電気的特性.値単位テスト基準
ISO データ
体積抵抗率 >1E13 Ohm*m IEC 62631-3-1
表面抵抗率 >1E15 Ohm IEC 62631-3-2
その他の特性.値単位テスト基準
吸水率 0.5 % Sim. to ISO 62
吸湿率 0.2 % Sim. to ISO 62
密度 1070 kg/m³ ISO 1183
試験片の成形条件.値単位テスト基準
ISO データ
ISO規格による成形条件 4894 - ISO ....-2
射出成形, 樹脂温度 240 °C ISO 294
射出成形, 金型温度 60 °C ISO 294
射出成形, 射出速度 200 mm/s ISO 294
射出成形, 保圧 70 MPa ISO 294
機能
粘度せん断速度. , KOSTIL® B 366(1), SAN, Versalis
せん断応力-せん断速度. , KOSTIL® B 366(1), SAN, Versalis
せん断弾性率-温度. , KOSTIL® B 366(1), SAN, Versalis
応力-ひずみ. , KOSTIL® B 366(1), SAN, Versalis
割線弾性率−ひずみ. , KOSTIL® B 366(1), SAN, Versalis
pvT , KOSTIL® B 366(1), SAN, Versalis
DSC , KOSTIL® B 366(1), SAN, Versalis
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
特殊な特性.
透明.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
村遜速揃
Injection Molding
PREPROCESSING

Drying conditions:

    Drying temperature                80 °C

    Drying time                            1-2 h



PROCESSING

Typical processing temperature range:

    Melt temperature          190 - 250 °C

    Mold temperature            40  -  75 °C

Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.