Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DOMAMID VHF 6G50 - PA6-GF50 - DOMO Engineering Plastics

Material Data Center offers the following functions for DOMAMID VHF 6G50:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Domamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
成形収縮率, 平行 0.1 / * % ISO 294-4, 2577
成形収縮率, 直角 0.5 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 15000 / 10000 MPa ISO 527
破壊応力 205 / 130 MPa ISO 527
破壊ひずみ 2 / 4 % ISO 527
曲げ弾性率, 23°C 14000 / 8000 MPa ISO 178
シャルピー衝撃強さ, +23°C 85 / 100 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 19 / 25 kJ/m² ISO 179/1eA
アイゾット衝撃試験, +23°C 80 / 90 kJ/m² ISO 180/1U
ノッチ付きIzod衝撃強さ, +23°C 18 / 25 kJ/m² ISO 180/1A
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10゚C/min 221 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 210 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 220 / * °C ISO 75-1/-2
ビカット軟化温度, B 215 / * °C ISO 306
厚さhでの燃焼性 HB / * class IEC 60695-11-10
試験片の厚さ 0.8 / * mm -
電気的特性.乾燥/調湿単位テスト基準
ISO データ
体積抵抗率 1E13 / - Ohm*m IEC 62631-3-1
表面抵抗率 * / 1E13 Ohm IEC 62631-3-2
その他の特性.乾燥/調湿単位テスト基準
密度. 1570 / - kg/m³ ISO 1183
材料特有の特性乾燥/調湿単位テスト基準
ISO データ
粘度数. 110 / * cm³/g ISO 307, 1157, 1628
Processing Recommendation Injection Molding単位テスト基準
Pre-drying - Temperature 75 - 85 °C -
Pre-drying - Time 2 - 4 h -
樹脂温度 260 - 280 °C -
金型温度 90 - 100 °C -
特殊な特性
成形加工法.
射出成形.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.