Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DOMAMID VHF 6G50 - PA6-GF50 - DOMO Engineering Plastics

Material Data Center offers the following functions for DOMAMID VHF 6G50:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Domamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquessec / condUnitéNorme du test
ISO Data
Retrait au moulage, parallèle 0.1 / * % ISO 294-4, 2577
Retrait au moulage, perpendiculaire 0.5 / * % ISO 294-4, 2577
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction 15000 / 10000 MPa ISO 527
Contrainte à la rupture 205 / 130 MPa ISO 527
Déformation à la rupture 2 / 4 % ISO 527
Module de flexion, 23°C 14000 / 8000 MPa ISO 178
Résistance au choc Charpy, +23°C 85 / 100 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 19 / 25 kJ/m² ISO 179/1eA
Résistance au choc Izod, +23°C 80 / 90 kJ/m² ISO 180/1U
Résistance au choc Izod avec entaille, +23°C 18 / 25 kJ/m² ISO 180/1A
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 221 / * °C ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa 210 / * °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 220 / * °C ISO 75-1/-2
Température de ramolliss. Vicat, B 215 / * °C ISO 306
Inflammabilité pr. épaisseur h HB / * class IEC 60695-11-10
Epaisseur de l'éprouvette 0.8 / * mm -
Propriétés électriquessec / condUnitéNorme du test
ISO Data
Résistivité transversale 1E13 / - Ohm*m IEC 62631-3-1
Résistivité superficielle * / 1E13 Ohm IEC 62631-3-2
Propriétés diversessec / condUnitéNorme du test
Masse volumique 1570 / - kg/m³ ISO 1183
Propriétés spécifiques à la matièresec / condUnitéNorme du test
ISO Data
Indice de viscosité 110 / * cm³/g ISO 307, 1157, 1628
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 75 - 85 °C -
Pré-séchage - temps 2 - 4 h -
Température de la matière fondue 260 - 280 °C -
Température du moule 90 - 100 °C -
Caractéristiques
Transformation
Moulage par injection
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.