Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TEREZ® PA 6 7500 GF 30 - PA6-GF30 - Ter Plastics

Material Data Center offers the following functions for TEREZ® PA 6 7500 GF 30:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Terez datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Medium viscosity Polyamide 6, 30% glassfiber reinforced, good flowability, good impact resistance and bright natural colour.
For moulding parts with high stiffness and good impact resistance.
機械的特性単位テスト基準
ISO データ
引張弾性率 9500 MPa ISO 527
引張強度 180 MPa ISO 527
降伏応力 180 MPa ISO 527
降伏ひずみ 3 % ISO 527
破壊ひずみ 4 % ISO 527
シャルピー衝撃強さ, +23°C 85 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 15 kJ/m² ISO 179/1eA
熱的特性単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 195 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 210 °C ISO 75-1/-2
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.6 mm -
電気的特性.単位テスト基準
ISO データ
耐トラッキング性 550 - IEC 60112
その他の特性.単位テスト基準
吸水率. 6.3 % Sim. to ISO 62
吸湿率 1.9 % Sim. to ISO 62
密度. 1350 kg/m³ ISO 1183
特殊な特性
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.