Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® PP 510P - PP - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® PP 510P:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
SABIC® PP 510P is a fibre grade with an anti gas fading stabilisation package.This grade is suitable for e.g. wipes and industrial carpets.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 12 g/10min ASTM D 1238
温度 230 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 1700 MPa ISO 527
降伏応力 35 MPa ISO 527
降伏ひずみ 11 % ISO 527
破壊ひずみ >50 % ISO 527
ASTM数据
降伏応力 36 MPa ASTM D 638
曲げ弾性率 1700 MPa ASTM D 790
ロックウェル硬度 R104 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 22 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
ビカット軟化温度, A 153 °C ISO 306
ビカット軟化温度, B 82 °C ISO 306
ASTM数据
DTUL @ 66 psi 104 °C ASTM D 648
ビカット軟化温度 153 °C ASTM D 1525
その他の特性.値単位テスト基準
密度 905 kg/m³ ASTM D 792
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.