Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of SABIC® HDPE M864E - (PE-HD) - Saudi Basic Industries Corporation (SABIC)
Material Data Center offers the following functions for SABIC® HDPE M864E:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces
Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center
Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our
disclaimer.
商品の説明文
SABIC® HDPE M864E is a high density polyethylene injection molding grade with a narrow molecular weight distribution. It is typically used for injection molding applications where rigidity, toughness and warp resistance are required. SABIC® HDPE M864E is available with UV stabilizer as SABIC® HDPE M864SE and
M864SG.
Typical applications.
Crates & Boxes: SABIC® HDPE M864E is typically used for the manufacture of injection molded cases, crates, trays, industrial pails and other similar items.
Caps & Closures: SABIC HDPE® M864E is typically used for Juice, Milk and Edible Oil applications.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
| 機械的特性 | 値 | 単位 | テスト基準 |
| ISO データ |
| 引張弾性率 |
1450 |
MPa |
ISO 527 |
| 降伏応力 |
32 |
MPa |
ISO 527 |
| 破壊応力 |
15 |
MPa |
ISO 527 |
| 破壊ひずみ |
>50 |
% |
ISO 527 |
| 曲げ弾性率, 23°C |
1700 |
MPa |
ISO 178 |
| 曲げ強さ |
32 |
MPa |
ISO 178 |
| ショア硬さD |
65 |
- |
ISO 7619-1 |
| 熱的特性 | 値 | 単位 | テスト基準 |
| ISO データ |
| 溶融温度, 10ﾟC/min |
134 |
°C |
ISO 11357-1/-3 |
| 荷重たわみ温度, 0.45 MPa |
94 |
°C |
ISO 75-1/-2 |
| ビカット軟化温度, A |
129 |
°C |
ISO 306 |
特殊な特性
成形加工法.
射出成形.
特殊な特性.
紫外線安定化.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
