Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer CXT17 - Europe - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer CXT17 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
LEXAN™ CXT17 Resin is a High Heat Polycarbonate Copolymer Resin with Vicat of 170°C and crystal clear transparency. This resin is optimized to have a broad processing window with limited yellowing. It is available in limited transparent colors.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 55 cm³/10min ISO 1133
温度 350 °C -
荷重 2.16 kg -
ASTM数据
メルトフローレイト, MFI 60 g/10min ASTM D 1238
温度 350 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 2450 MPa ISO 527
降伏応力 75 MPa ISO 527
降伏ひずみ 6.5 % ISO 527
破壊応力 60 MPa ISO 527
破壊ひずみ 50 % ISO 527
曲げ弾性率 2500 MPa ISO 178
シャルピー衝撃強さ, +23°C, 3mm N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C, 3mm 10 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C, 3mm 7 kJ/m² ISO 179/1eA
アイゾット衝撃試験, +23°C N kJ/m² ISO 180/1U
ノッチ付きアイゾット衝撃強さ, +23°C, 3mm 8 kJ/m² ISO 180/1A
ノッチ付きアイゾット衝撃強, -30°C, 3mm 7 kJ/m² ISO 180/1A
ASTM数据
引張弾性率 2500 MPa ASTM D 638
降伏応力 75 MPa ASTM D 638
破壊応力 60 MPa ASTM D 638
降伏点伸び 7 % ASTM D 638
破断伸び 40 % ASTM D 638
曲げ弾性率 2450 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 80 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 75 J/m ASTM D 256
温度 -30 °C -
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 152 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 165 °C ISO 75-1/-2
ビカット軟化温度, 120°C/h 50N 172 °C ISO 306
熱伝導率 0.2 W/(m K) DIN 52616
ASTM数据
DTUL @ 66 psi 165 °C ASTM D 648
DTUL @ 264 psi 152 °C ASTM D 648
その他の特性.値単位テスト基準
吸水率. 0.3 % Sim. to ISO 62
吸湿率 0.3 % Sim. to ISO 62
密度. 1210 kg/m³ ISO 1183
密度 1210 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 135 °C -
Pre-drying - Time 4 - 6 h -
Processing humidity ≤0.02 % -
樹脂温度 290 - 350 °C -
金型温度 110 - 150 °C -
Zone 1 270 - 330 °C -
Zone 2 280 - 340 °C -
Zone 3 290 - 350 °C -
Screw speed 40 - 90 rpm -
Back pressure 0.3 - 0.7 MPa -
特殊な特性
成形加工法.
射出成形.
特殊な特性.
透明.
アプリケーション
自動車
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.