Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FIL-A-GEHR PC/ABS® - (PC+ABS) - Gehr GmbH

Material Data Center offers the following functions for FIL-A-GEHR PC/ABS®:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Fil-A-Gehr datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - その他の特性. - 3D Data
Any use of this information falls under the rules of our disclaimer.
商品の説明文
To determine the FIL-A-GEHR PC/ABS® data, ISO 527 tensile test speciment were printed on a EVOTECH printer with the following parameters: TPrint 280°C, TBed 90°C, Printing speed 55 mm/s, Slicer Simplify3D
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 18[1] cm³/10min ISO 1133
温度 260 °C -
荷重 5 kg -
1: Data based on raw material
機械的特性値単位テスト基準
ISO データ
引張弾性率 2400[2] MPa ISO 527
降伏応力 54[2] MPa ISO 527
2: Data based on raw material
その他の特性.値単位テスト基準
吸水率. 0.7[3] % Sim. to ISO 62
密度. 1130[3] kg/m³ ISO 1183
3: Data based on raw material
3D Data値単位テスト基準
引張弾性率, flat 2240 MPa -
引張弾性率, upright 2350 MPa -
引張強度, flat 44.7 MPa -
引張強度, upright 18.3 MPa -
特殊な特性
成形加工法.
Additive Manufacturing
納入形状.
Monofilament, 黒
特殊な特性.
高耐衝撃及び耐衝撃改良.
な特性
Good Adhesion, Low Odor, Low Warpage
アプリケーション
自動車, 電気電子
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.