Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® R 1000 - (TPU-ARES)-GF - BASF Polyurethanes GmbH

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 試験片の成形条件. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

DESCRIPTION
Elastollan R 1000 is a glass fibre-reinforced TPU

SPECIAL PROPERTIES
very good impact strength, high stiffness combined with good
strain, low thermal expansion coefficient
equivalent to metal (Al), low mould shrinkage, ease of paintability

TYPICAL APPLICATIONS
technical parts

OTHER HINTS
predrying: 2-3h at 100-120°C
(air circulating oven or dehumidified air dryer),
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	1000	MPa	ISO 527
破壊応力	50	MPa	ISO 527
破壊ひずみ	40	%	ISO 527
シャルピー衝撃強さ, -30°C	130	kJ/m²	ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C	N	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	20	kJ/m²	ISO 179/1eA
引張衝撃強さ, +23ﾟC	610	kJ/m²	ISO 8256/1
破壊応力 TPE	50	MPa	ISO 527
破壊ひずみ TPE	40	%	ISO 527
ショア硬さD	58	-	ISO 7619-1

熱的特性	値	単位	テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa	114	°C	ISO 75-1/-2
荷重たわみ温度, 0.45 MPa	145	°C	ISO 75-1/-2

電気的特性.	値	単位	テスト基準
ISO データ
誘電正接, 100Hz	280	E-4	IEC 62631-2-1
誘電正接, 1MHz	650	E-4	IEC 62631-2-1
体積抵抗率	1E10	Ohm*m	IEC 62631-3-1
表面抵抗率	>1E15	Ohm	IEC 62631-3-2
耐電圧	38	kV/mm	IEC 60243-1
耐トラッキング性	600	-	IEC 60112

その他の特性.	値	単位	テスト基準
吸水率	1	%	Sim. to ISO 62
密度	1360	kg/m³	ISO 1183

試験片の成形条件.	値	単位	テスト基準
ISO データ
射出成形, 樹脂温度	220	°C	ISO 294
射出成形, 金型温度	60	°C	ISO 294

機能

特殊な特性

成形加工法.

射出成形.

納入形状.

ペレット.

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

その他の情報

村遜速揃

Barrel temperature : 205 - 220 °C
Melt temperature : 220 °C
Mold temperature: 25 - 70 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.