Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Durabio™ D7340 - PC - Mitsubishi Chemical Performance Polymers

Material Data Center offers the following functions for Durabio™ D7340:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Durabio datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics単位テスト基準
ISO データ
メルトボリュームレイト, MVR 8 cm³/10min ISO 1133
温度 230 °C -
荷重 2.16 kg -
メルトフローレート, MFI 10 g/10min ISO 1133
温度 230 °C -
荷重 2.16 kg -
機械的特性単位テスト基準
ISO データ
引張弾性率 2700 MPa ISO 527
引張強度 79 MPa ISO 527
破壊ひずみ 72 % ISO 527
曲げ弾性率, 23°C 2700 MPa ISO 178
曲げ強さ 116 MPa ISO 178
シャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 7 kJ/m² ISO 179/1eA
熱的特性単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 102 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 114 °C ISO 75-1/-2
線膨張係数, 平行 69 E-6/K ISO 11359-1/-2
線膨張係数, 直角 69 E-6/K ISO 11359-1/-2
光学特性単位テスト基準
ISO Data
視感透過率 92 % ISO 13468-1, -2
その他の特性.単位テスト基準
密度. 1360 kg/m³ ISO 1183
Processing Recommendation Injection Molding単位テスト基準
Pre-drying - Temperature 90 - 100 °C -
Pre-drying - Time 5 - 7 h -
樹脂温度 230 - 250 °C -
金型温度 60 - 80 °C -
Feed temperature 220 - 260 °C -
Zone 1 220 - 260 °C -
Nozzle temperature 220 - 260 °C -
Screw speed 50 rpm -
Injection pressure 50 - 95 MPa -
Back pressure 10 MPa -
特殊な特性
成形加工法.
射出成形.
納入形状.
特殊な特性.
熱安定化., 透明.
な特性
Light Guiding
Certifications
Contains renewable resources
アプリケーション
自動車, 電気電子, パッケージング, スポーツ用品
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.