Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CYROLITE® GS 90 - MBS - Röhm GmbH

Material Data Center offers the following functions for CYROLITE® GS 90:
unit conversion, PDF datasheet print, comparison with other plastics, flow length calculation, snap fit calculation, beam deflection calculation, cooling time calculation, parameters for material models, CAE Interfaces

Check here, which other Cyrolite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 試験片の成形条件. - 機能
Any use of this information falls under the rules of our disclaimer.
商品の説明文

Productprofil:

CYROLITE GS-90 compound is an impact-modified acrylic-based multipolymer for molding and extrusion of medical applications.

 

Typical properties of CYROLITE® acrylic-based multipolymer compounds are:


• excellent chemical resistance to fats and oils
• excellent bonding and welding capabilities
• excellent bonding to PVC tubing
• good impact strength
• good light transmission
• good resistance to EtO, gamma and E-beam sterilization.

 

The special properties of CYROLITE GS-90 compound are:


• superior gamma sterilization color stability
• excellent melt flow rate
• very good transmission and clarity

Application:

Used for injection molding and extrusion of medical devices, medical packaging, as well as  toys and appliance parts.

Example:

Y-Sites, luer locks, check valves and drip chambers.

Processing:

CYROLITE GS-90 compound can be processed in injection molding machines and extrusion lines with 3- zone general purpose screws.

Physical Form / Packaging:

Available in 1500 lb. gaylord boxes; other packaging available on request.

Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 3 cm³/10min ISO 1133
温度 230 °C -
荷重 3.8 kg -
溶融時の密度 998 kg/m³ -
溶融時の熱伝導率 0.163 W/(m K) -
溶融時の比熱 2260 J/(kg K) -
熱拡散率 7.22E-8 m²/s -
突き出し時の時の温度 75 °C -
機械的特性値単位テスト基準
ISO データ
引張弾性率 2300 MPa ISO 527
降伏応力 46 MPa ISO 527
降伏ひずみ 3.8 % ISO 527
破壊呼びひずみ 14 % ISO 527
シャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 11 kJ/m² ISO 179/1eA
熱的特性値単位テスト基準
ISO データ
ビカット軟化温度, B 95 °C ISO 306
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.6 mm -
酸素指数 18 % ISO 4589-1/-2
電気的特性.値単位テスト基準
ISO データ
体積抵抗率 >1E13 Ohm*m IEC 62631-3-1
表面抵抗率 1E13 Ohm IEC 62631-3-2
その他の特性.値単位テスト基準
吸湿率 0.3 % Sim. to ISO 62
密度 1110 kg/m³ ISO 1183
試験片の成形条件.値単位テスト基準
ISO データ
射出成形, 樹脂温度 240 °C ISO 294
射出成形, 金型温度 65 °C ISO 294
射出成形, 射出速度 195 mm/s ISO 294
機能
粘度せん断速度. , CYROLITE® GS 90, MBS, Röhm
せん断応力-せん断速度. , CYROLITE® GS 90, MBS, Röhm
応力-ひずみ. , CYROLITE® GS 90, MBS, Röhm
割線弾性率−ひずみ. , CYROLITE® GS 90, MBS, Röhm
特殊な特性
成形加工法.
射出成形., フィルム押出成形., その他の押出成形., 熱成形.
納入形状.
ペレット.
特殊な特性.
高耐衝撃及び耐衝撃改良., 透明., 滅菌可能, エチレンオキシド滅菌(EtO), Gamma irradiation sterilization, Electron beam (e-beam) sterilization
な特性
Color Stability, Good Adhesion, Weldable
耐薬品性
Grease Resistance, Oil Resistance
アプリケーション
医療の, パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
村遜速揃
PREPROCESSING
Predrying temperature: 70 °C
Predrying time: 3 - 4 h
PROCESSING
Melt temperature: 210 - 230°C
Mold temperature:50 - 80°C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.