Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CYCOLOY™ FR Resin RCY6713 - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for CYCOLOY™ FR Resin RCY6713:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Cycoloy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
CYCOLOY RCY6713 resin is based on high heat Polycarbonate (PC) with non-brominated and non-chlorinated flame retardant. It contains 30% post consumer recycle content with a UL-94 V0 rating @ 1.5 mm. This grade is suitable for thin wall applications that require high flow and high stiffness performance.

UL Yellow Card Link: E207780-100960579
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 16 g/10min ISO 1133
温度 260 °C -
荷重 5 kg -
ASTM数据
メルトフローレイト, MFI 6.3 g/10min ASTM D 1238
温度 260 °C -
荷重 2.16 kg -
成形収縮率., 平行 0.005 mm/mm ASTM D 955
機械的特性値単位テスト基準
ISO データ
引張弾性率 2300 MPa ISO 527
降伏応力 58 MPa ISO 527
降伏ひずみ 5 % ISO 527
破壊応力 50 MPa ISO 527
破壊ひずみ 72 % ISO 527
曲げ弾性率, 23°C 2300 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 48 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC 13 kJ/m² ISO 179/1eA
ノッチ付きIzod衝撃強さ, +23°C 65 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 17 kJ/m² ISO 180/1A
温度 -30 °C -
ASTM数据
引張弾性率 2300 MPa ASTM D 638
降伏応力 60 MPa ASTM D 638
破壊応力 54 MPa ASTM D 638
降伏点伸び 5.5 % ASTM D 638
破断伸び 76 % ASTM D 638
曲げ弾性率 2320 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 750 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 113 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 126 °C ISO 75-1/-2
ビカット軟化温度, B 133 °C ISO 306
線膨張係数, 平行 70 E-6/K ISO 11359-1/-2
線膨張係数, 直角 70 E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 1.5 mm -
Yellow Card 可用 はい - -
厚さhでの燃焼性 V-1 class IEC 60695-11-10
試験片の厚さ 1.0 mm -
Yellow Card 可用 はい - -
ASTM数据
線膨張係数, 平行 77.4 E-6/K ASTM D 696
線膨張係数, 直角 59.4 E-6/K ASTM D 696
DTUL @ 66 psi 126 °C ASTM D 648
DTUL @ 264 psi 112 °C ASTM D 648
その他の特性.値単位テスト基準
密度. 1200 kg/m³ ISO 1183
密度 1190 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 90 - 100 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.04 % -
樹脂温度 270 - 300 °C -
金型温度 60 - 90 °C -
Zone 1 260 - 300 °C -
Zone 2 260 - 300 °C -
Zone 3 265 - 300 °C -
Nozzle temperature 265 - 300 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.7 MPa -
特殊な特性
成形加工法.
射出成形.
特殊な特性.
難燃., Halogen-free, 高耐衝撃及び耐衝撃改良., 熱安定化.
な特性
Copolymer
Certifications
Recycled Resin Content
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.