Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CELANEX® 5202 - PBT-GF15 - Celanese

Material Data Center offers the following functions for CELANEX® 5202:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Celanex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Celanex 5202 is a 15% glass filled polyester blend that features improved surface gloss and has an excellent balance of mechanical properties, processability, and color stability under heat and UV exposure. A typical application for Celanex 5202 is oven handles.

Flammability at thickness h (0.8 mm)HB-
Processing/Physical Characteristics値単位テスト基準
ISO データ
成形収縮率, 平行 0.3 % ISO 294-4, 2577
成形収縮率, 直角 0.7 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張弾性率 6100 MPa ISO 527
破壊応力 100 MPa ISO 527
破壊ひずみ 2.5 % ISO 527
シャルピー衝撃強さ, +23°C 15 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C 17 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 4.7 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C 4.5 kJ/m² ISO 179/1eA
ショア硬さD 83 - ISO 7619-1
熱的特性値単位テスト基準
ISO データ
溶融温度, 10°C/min 250 °C ISO 11357-1/-3
ガラス転移点, 10°C/min 50 °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 180 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 215 °C ISO 75-1/-2
線膨張係数, 平行 42 E-6/K ISO 11359-1/-2
線膨張係数, 直角 73 E-6/K ISO 11359-1/-2
厚さhでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 0.8 mm -
電気的特性.値単位テスト基準
ISO データ
比誘電率, 100Hz 2.7 - IEC 62631-2-1
比誘電率, 1MHz 2.7 - IEC 62631-2-1
誘電正接, 1MHz 140 E-4 IEC 62631-2-1
体積抵抗率 >1E13 Ohm*m IEC 62631-3-1
表面抵抗率 >1E15 Ohm IEC 62631-3-2
耐電圧 17 kV/mm IEC 60243-1
その他の特性.値単位テスト基準
吸湿率 0.17 % Sim. to ISO 62
密度 1440 kg/m³ ISO 1183
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
特殊な特性.
紫外線安定化., 熱安定化.
な特性
Color Stability, High Gloss
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.