Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Bakelite® PF 31.5 - PF-X - Bakelite Synthetics

Material Data Center offers the following functions for Bakelite® PF 31.5:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Bakelite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
商品の説明文

Product description:

Phenolic moulding compound, mainly organically filled, electrically high grade.

Application areas:

Parts for electrical and telecommunications technology, car electronics, terminal boards and baseplates, housings, mounting parts, motor ignition systems.

Property Name Value Unit Standard No.
Apparent density (moulding compound) 0.6 g/cm³ ISO 60
Moulding shrinkage (injection moulding, longitudinal)  0.9 % ISO 2577
Post shrinkage (injection moulding, 168h/110°C) 0.95 % ISO 2577
Moulding shrinkage (compression moulding, longitudinal)  0.45 % ISO 2577
Post shrinkage (compression moulding, 168h/110°C) 0.45 % ISO 2577
Flexural strength (2mm/min) 110 MPa ISO 178
Flexural modulus 8000 MPa ISO 178
Ball indentation hardness (H 961/30) 300 MPa ISO 2039/P1
Water absorption (24h/23°C) 37 mg similar to ISO 62 
Preparation of Test Specimens of Thermosetting Moulding Compound
  • Compression to ISO 295
  • Injection to ISO 10724


Storage capability
  6 months (relative humidity of 50-60% and maximum storage temperature of approximately 20°C)

Processing/Physical Characteristics単位テスト基準
ISO データ
成形収縮率, 平行 0.9 % ISO 294-4, 2577
機械的特性単位テスト基準
ISO データ
シャルピー衝撃強さ, +23°C 8 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 1.8 kJ/m² ISO 179/1eA
熱的特性単位テスト基準
ISO データ
荷重たわみ温度, 8.00 MPa 115 °C ISO 75-1/-2
電気的特性.単位テスト基準
ISO データ
比誘電率, 100Hz 7 - IEC 62631-2-1
誘電正接, 100Hz 0.13 E-4 IEC 62631-2-1
体積抵抗率 1E10 Ohm*m IEC 62631-3-1
表面抵抗率 1E11 Ohm IEC 62631-3-2
耐電圧 28 kV/mm IEC 60243-1
耐トラッキング性 125 - IEC 60112
その他の特性.単位テスト基準
密度 1440 kg/m³ ISO 1183
試験片の成形条件.単位テスト基準
ISO データ
射出成形, 樹脂温度 115 °C ISO 10724
射出成形, 射出速度 170 mm/s ISO 10724
射出成形, 保圧 100 MPa ISO 10724
射出成形, 硬化時間 25 min ISO 10724
圧縮成形, 金型温度 160 °C ISO 295
圧縮成形, 硬化時間 1 min ISO 295
特殊な特性
成形加工法.
射出成形., トランスファー成形.
領域別の利用可能性
その他の情報
村遜速揃
VERARBEITUNG 
Temperature of material: 80 - 100 °C
Mould temperature: 160 - 190 °C
Curing time: 10-20 sec
 
Further Information:
Barrel temperature
  - Feed zone: 60-75 °C
  - Nozzle zone: 80-100 °C
Cavity moulding pressure: >15 MPa
Back pressure: 0.5-2 MPa
Holding pressure: 60% of injection pressure
属袖遜速揃
PROCESSING
Mould temperature:160-190°C
Curing time:20-40sec
Cavity moulding pressure: >15MPa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.