Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Asaflex™ 835 - TPS - Asahi Kasei

Material Data Center offers the following functions for Asaflex™ 835:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Asaflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
商品の説明文
With wax.
Processing/Physical Characteristics単位テスト基準
ISO データ
メルトフローレート, MFI 6 g/10min ISO 1133
温度 200 °C -
荷重 5 kg -
成形収縮率, 平行 0.5 % ISO 294-4, 2577
機械的特性単位テスト基準
ISO データ
引張強度 18 MPa ISO 527
曲げ弾性率, 23°C 1100 MPa ISO 178
曲げ強さ 21 MPa ISO 178
シャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eA
Type of failure (P) - -
ショア硬さD 55 - ISO 7619-1
ロックウェル硬度 R 10 - ISO 2039-2
熱的特性単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 60 °C ISO 75-1/-2
ビカット軟化温度, A 72 °C ISO 306
光学特性単位テスト基準
ISO Data
ヘイズ 2 - ISO 14782
Other Standards[S]
視感透過率 89 % ISO 13468
S: These properties are reported by the producer according standards that are different to our defaults.
その他の特性.単位テスト基準
吸水率. 0.1 % Sim. to ISO 62
密度. 1010 kg/m³ ISO 1183
Processing Recommendation Injection Molding単位テスト基準
樹脂温度 180 - 220 °C -
金型温度 50 °C -
Zone 1 180 - 200 °C -
Nozzle temperature 200 °C -
Injection pressure 67 MPa -
Back pressure 6 MPa -
Processing Recommendation Extrusion単位テスト基準
金型温度 60 - 80 °C -
Zone 1 170 °C -
Zone 2 180 °C -
Zone 3 185 °C -
Zone 4 190 °C -
Zone 5 200 °C -
Nozzle temperature 200 °C -
特殊な特性
成形加工法.
射出成形., その他の押出成形.
特殊な特性.
高耐衝撃及び耐衝撃改良., 透明.
な特性
High Gloss, Copolymer
アプリケーション
パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.