Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® LX9112 BK - PA12 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® LX9112 BK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Conductive, heat-stabilized and light-resistant polyamide 12 compound for the extrusion coating of steel tubing

VESTAMID® LX9112 BK is a heat-stabilized, conductive polyamide 12 compound, especially developed for the pore-free extrusion coating of steel tubing.
 
Compared to commonly use conductive extrusion compounds VESTAMID® LX9112 BK is distinguished by a significant lower melt viscosity and respectively by outstanding extrusion characteristics even in very thin coatings.
 
Steel tubing coated with VESTAMID® LX9112 BK meet the requirements of the US automotive industry to prevent electrostatic charge caused by flowing liquid fuels.

Due to the excellent impact strength and the  good abrasion and chemical resistance of polyamide 12 the seamless coating with VESTAMID® LX9112 BK improves the corrosion resistance of steel tubing significantly.
 
VESTAMID® LX9112 BK is supplied as cylindrical pellets, ready for processing in moisture-proof packaging.


Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM

Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 34 / * cm³/10min ISO 1133
Temperatura 240 / * °C -
Carico 10 / * kg -
Ritiro di stampaggio, parallelo 1.2 / * % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 1.5 / * % ISO 294-4, 2577
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 2120 / 1690 MPa ISO 527
Carico unitario a trazione 54 / 48 MPa ISO 527
Deformazione a snervamento 4 / 13 % ISO 527
Deformazione nominale a rottura 32 / >50 % ISO 527
Resistenza all'urto Charpy, +23°C N / N kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C N / N kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 4 / 3 kJ/m² ISO 179/1eA
Type of failure C / C - -
Resistenzia all'urto Charpy con intaglio, -30°C 3 / 3 kJ/m² ISO 179/1eA
Type of failure C / C - -
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 176 / * °C ISO 11357-1/-3
Temperatura di transizione vetrosa, 10°C/min 44 / * °C ISO 11357-1/-2
Temp.di inflessione sotto carico, 1.80 MPa 52 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 150 / * °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 156 / * °C ISO 306
Coeff.di dilatazione termica lin., parallelo 105 / * E-6/K ISO 11359-1/-2
Coeff.di dilatazione termica lin., perpend. 124 / * E-6/K ISO 11359-1/-2
Proprietà Elettrichesecco/condUnitáNorma del test
ISO Data
Resistività volumica 43000 / 29000 Ohm*m IEC 62631-3-1
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 1.11 / * % Sim. alla ISO 62
Assorbimento d'umidità 0.65 / * % Sim. alla ISO 62
Massa volumica 1120 / - kg/m³ ISO 1183
Caratteristiche
Processabilità e Forma di Forni
Altre Estrusioni, Rivestimento
Forma fisica disponibile
Pellet, Nero
Caratteristiche speciali
Migliorata conduttività elettrica, Antistatico, Alto urto o modificato all'urto, Stabilizzato o stabile alla luce, Stabilizzato o stabile al calore
Resistenza Chimica
Resistenza chimica generale
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.