Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tritan™ MP100 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Tritan™ MP100:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tritan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Termiche - Proprietà Ottiche - Altre Proprietà - Proprietà Meccaniche (Film)
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto

Eastman Tritan™ MP100 is an amorphous copolyester that combines excellent clarity and toughness with outstanding heat and chemical resistance. Film and sheet manufactured from this new-generation copolyester can be thermoformed with a wide processing window that allows for product designs that reflect intricate detail.

Eastman Tritan™ MP100 copolyester is suitable for use with most forms of sterilization including radiation and ethylene oxide. It is NOT suitable for autoclave/steam sterilization. Eastman Tritan™ MP100 copolyester has been

formulated for use in medical film, sheet, and packaging applications.

Proprietà TermicheValoreUnitáNorma del test
ASTM Data
coefficiente d’espansione termica, lung. 88 E-6/K ASTM D 696
Temperatura di transizione vetrosa 110 °C ASTM E 1356
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Brillantezza 161 - ASTM D 2457
Opacità 1 % ASTM D 1003
Trasmissione luminosa 92 % ASTM D 1003
Indice di rifrazione 1.54 - ASTM D 542
Altre ProprietàValoreUnitáNorma del test
Assorbimento d’acqua, 24hr 0.5 % ASTM D 570
Densità 1190 kg/m³ ASTM D 792
Proprietà Meccaniche (Film)ValoreUnitáNorma del test
ISO Data
Resistenza alla lacerazione Trouser, parallel 11 N/mm ISO 6383-1
Resistenza alla lacerazione Trouser, normal 11 N/mm ISO 6383-1
Spessore del provino 0.25 mm -
ASTM Data
Modulo a trazione, lung. 1460 MPa ASTM D 882
Modulo a trazione, tras. 1380 MPa ASTM D 882
Resistenza alla trazione di snervamento, lung. 41 MPa ASTM D 882
Resistenza alla trazione di snervamento, tras. 40 MPa ASTM D 882
Resistenza alla trazione a rottura, lung. 59 MPa ASTM D 882
Resistenza alla trazione a rottura, tras. 52 MPa ASTM D 882
Allungamento a snervamento, lung. 7 % ASTM D 882
Allungamento a snervamento, tras. 7 % ASTM D 882
Allungamento a rottura, lung. 179 % ASTM D 882
Allungamento a rottura, tras. 203 % ASTM D 882
Spessore del provino 0.25 mm -
Caratteristiche
Processabilità e Forma di Forni
Estrusione Film, Estrusione di Lastre/Fogli, Termoformatura
Caratteristiche speciali
Stabilizzato o stabile al calore, Trasparente, Sterilizzabile, Sterilizzazione ad ossido di etilene (EtO), Gamma irradiation sterilization
Caratteristiche
Amorfo, Termosaldatura, Copolimero
Resistenza Chimica
Resistenza chimica generale, Resistenza alla radiazione
Applicazioni
Medicale, Imballaggio
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.