Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Desmopan 9370A GMP - TPU - Covestro Deutschland AG

Material Data Center offers the following functions for Desmopan 9370A GMP:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Desmopan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
  • Extrusion- and injection molding grade
  • with special UV stabilizers
  • very good hydrolysis and microbial resistance
  • good low-temperature flexibility
  • free from plasticizers
  • high moisture vapor transmission rate
    Application:
  • breathable films
  • Films
  • Sports shoe soles
  • hard - soft systems
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Carico Unitario al 10% di allungamento 0.6 MPa ISO 527
Carico Unitario al 100% di allungamento 2.9 MPa ISO 527
Carico Unitario al 300% di allungamento 5 MPa ISO 527
Carico Unitario a rottura TPE 26 MPa ISO 527
Allungamento a rottura TPE >300 % ISO 527
Resistenza a trazione 25.7 MPa ISO 37
Deformazione a rottura 738 % ISO 37
Deformazione residua dopo compressione a 70°C, 24h 49 % ISO 815
Resistenza alla lacerazione 40 kN/m ISO 34-1
Resistenza all'abrasione 70 mm³ ISO 4649
Durezza Shore A 70 - ISO 7619-1
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1060 kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Temperatura di fusione 190 - 210 °C -
Temperatura dello stampo 20 - 40 °C -
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Temperatura di fusione 175 - 210 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Estrusione Film, Altre Estrusioni
Resistenza Chimica
Stabilità idrolitica
Certifications
Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti secondo 1935/2004/EG, Approvato per l'utilizzo per contatto con alimenti 10/2011, Approvato per l'utilizzo per contatto con alimenti secondo la FDA 21 CFR, Contatto con acqua potabile, Contatto con acqua potabile DVGW W270
Applicazioni
Attrezzature sportive
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Altre informazioni
Stampaggio ad Iniezione
PREPROCESSING
Max. water content: 0.05 %
Max. drying temperature: 80 °C
Drying time:
Dry air dryer 1-2 h

PROCESSING
Melt temperature: 190-210 °C
Mold temperature: 20-40 °C
Altre Estrusioni

 Preprocessing

Max. Water content ≤0.05 %
Drying temperature 70-110 °C
Dry air dryer 1-2 h

 Processing

Melt temperature 175-210 °C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.