Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Desmopan 9370A GMP - TPU - Covestro Deutschland AG

Material Data Center offers the following functions for Desmopan 9370A GMP:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Desmopan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés diverses - Recommandations pour la transformation Moulage par injection - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Informations produit
  • Extrusion- and injection molding grade
  • with special UV stabilizers
  • very good hydrolysis and microbial resistance
  • good low-temperature flexibility
  • free from plasticizers
  • high moisture vapor transmission rate
    Application:
  • breathable films
  • Films
  • Sports shoe soles
  • hard - soft systems
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Contrainte à 10% de déformation 0.6 MPa ISO 527
Contrainte à 100% de déformation 2.9 MPa ISO 527
Contrainte à 300% de déformation 5 MPa ISO 527
Contrainte à la rupture TPE 26 MPa ISO 527
Déformation à la rupture TPE >300 % ISO 527
Résistance à la traction 25.7 MPa ISO 37
Déformation à la rupture 738 % ISO 37
Déformation rémanente en compression à 70 °C, 24h 49 % ISO 815
Résistance à la déchirure 40 kN/m ISO 34-1
Résistance à l'abrasion 70 mm³ ISO 4649
Dureté Shore A 70 - ISO 7619-1
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1060 kg/m³ ISO 1183
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Température de la matière fondue 190 - 210 °C -
Température du moule 20 - 40 °C -
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Température de la matière fondue 175 - 210 °C -
Caractéristiques
Transformation
Moulage par injection, Extrusion de films, Extrusion (autres)
Résistance Chimique
Stabilité hydrolytique
Certifications
Contact alimentaire, Approuvé pour le contact alimentaire suivant 1935/2004/CE, Approuvé pour le contact alimentaire suivant 10/2011, FDA 21 CFR approbation, Contact avec l'eau potable, Contact avec l'eau potable DVGW W270
Applications
Sport
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Autres informations
Moulages par injection
PREPROCESSING
Max. water content: 0.05 %
Max. drying temperature: 80 °C
Drying time:
Dry air dryer 1-2 h

PROCESSING
Melt temperature: 190-210 °C
Mold temperature: 20-40 °C
Extrusion (autres)

 Preprocessing

Max. Water content ≤0.05 %
Drying temperature 70-110 °C
Dry air dryer 1-2 h

 Processing

Melt temperature 175-210 °C
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.