Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tenite™ Butyrate 485E3720013 - CAB - Eastman Chemical Co.

Material Data Center offers the following functions for Tenite™ Butyrate 485E3720013:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tenite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Ottiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite™ cellulosic plastics are available in natural, clear, selected ambers, or smoke transparents and black translucents.

Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulose Acetate Butyrate 485-13 contains an odor mask and an ultra-violet inhibitor (UVI). It has a plasticizer level of 13%.




Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Ritiro di stampaggio, parallelo 0.004 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Resistenza alla trazione di snervamento 29 MPa ASTM D 638
Resistenza alla trazione a rottura 39.3 MPa ASTM D 638
Allungamento a rottura 50 % ASTM D 638
Modulo a flessione 1241 MPa ASTM D 790
Durezza Rockwell R 59 - ASTM D 785
Resistenza all'urto Izod con intaglio, 1/8 in 283 J/m ASTM D 256
Resistenza all'urto Izod con intaglio, basso temperatura 101 J/m ASTM D 256
Temperatura -40 °C -
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
DTUL a 66 psi 69 °C ASTM D 648
DTUL a 264 psi 81 °C ASTM D 648
Temp.di rammollimento Vicat 100 °C ASTM D 1525
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Opacità 8.5 % ASTM D 1003
Indice di rifrazione 1.48 - ASTM D 542
Altre ProprietàValoreUnitáNorma del test
Assorbimento d’acqua, 24hr 1.4 % ASTM D 570
Densità 1180 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Estrusione Profilati
Additivi
Plastificante
Caratteristiche speciali
Estab. agli U.V. o per applicaz.in esterni, Trasparente
Caratteristiche
High Gloss, Basso odore
Certifications
Contiene risorse rinnovabili
Applicazioni
Attrezzature sportive, Giocattoli
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.