Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SCHULAMID® 66 GF 30 H - PA66-GF30 - LyondellBasell Industries

Material Data Center offers the following functions for SCHULAMID® 66 GF 30 H:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Schulamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
30% glass fibre reinforced and heat stabilized PA 66 grade

Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Ritiro di stampaggio, parallelo 0.003 mm/mm ASTM D 955
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 10000 / 6200 MPa ISO 527
Carico unitario a rottura 180 / 110 MPa ISO 527
Deformazione a rottura 3 / 7 % ISO 527
Resistenza all'urto Charpy, +23°C 90 / 95 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 60 / - kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 10 / 18 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C 7 / - kJ/m² ISO 179/1eA
ASTM Data
Resistenza alla trazione di snervamento 150 / - MPa ASTM D 638
Allungamento a rottura 4.5 / - % ASTM D 638
Modulo a flessione 9763 / - MPa ASTM D 790
Resistenza alla flessione 230 / - MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 64.1 / - J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
DTUL a 66 psi 254 °C ASTM D 648
DTUL a 264 psi 238 °C ASTM D 648
Altre ProprietàValoreUnitáNorma del test
Densità 1380 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Granuli
Caratteristiche speciali
Stabilizzato o stabile al calore
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Altre informazioni
Stampaggio ad Iniezione
PREPROCESSING; Pretreatment
Predrying: 4-6h / 80°C

PROCESSING ;Processing:

Melttemperature290 - 310°C
Mouldtemperature60 - 100°C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.