Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® PP RELY 71EK71PS - PP - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® PP RELY 71EK71PS:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
This impact copolymer has a high molecular weight and is provided with a long-term heat stabilisation package. It exhibits high stiffness in combination with very high impact strength even at low temperatures. This material is typically used for extrusion of sewage pipe applications and can also be typically used for blow-moulding of large containers and sheet extrusion. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com This grade material is UL registered under File E111275 (www.ul.com) IMDS 80775790
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 1450 MPa ISO 527
Carico unitario a trazione 28 MPa ISO 527
Deformazione a snervamento 8 % ISO 527
Resistenza all'urto Charpy, +23°C N kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 80 kJ/m² ISO 179/1eA
Resistenza all'urto Izod con intaglio 6 kJ/m² ISO 180/1A
Durezza Shore D 66 - ISO 7619-1
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 55 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 95 °C ISO 75-1/-2
Temp.di rammollimento Vicat, A 156 °C ISO 306
Temp.di rammollimento Vicat, B 81 °C ISO 306
Caratteristiche
Caratteristiche speciali
Stabilizzato o stabile al calore
Caratteristiche
Copolimero
Certifications
Contatto con gli alimenti
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.