Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of POLYFLAM® RPP 374 ND CS1 5V - PP-T20 FR(17) - LyondellBasell Industries

Material Data Center offers the following functions for POLYFLAM® RPP 374 ND CS1 5V:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Polyflam datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
20% talc filled flame retardant PP-homopolymer without PBDE; UL94 5V at 2mm wall thickness

Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 5 cm³/10min ISO 1133
Temperatura 230 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 3700 MPa ISO 527
Carico unitario a trazione 27 MPa ISO 527
Deformazione a snervamento 2 % ISO 527
Resistenza all'urto Charpy, +23°C 12 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 12 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 2 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C 1.8 kJ/m² ISO 179/1eA
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 80 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 118 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 92 °C ISO 306
Reaz. al fuoco spess.nom. 1.5mm V-0 class IEC 60695-11-10
Spessore provato 1.5 mm -
Yellow Card disponibile - -
Reazione al fuoco a spessore h V-0 class IEC 60695-11-10
Spessore provato 1.5 mm -
Yellow Card disponibile - -
Reazione al fuoco 5V a spess. h 5VA class IEC 60695-11-20
Spessore provato 3.0 mm -
Yellow Card disponibile - -
Indice di ossigeno 29 % ISO 4589-1/-2
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Resistività volumica 1E11 Ohm*m IEC 62631-3-1
Resistività superficiale >1E15 Ohm IEC 62631-3-2
Res. Alle correnti striscianti superficiali 600 - IEC 60112
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1500 kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 80 °C -
Pre-essiccamento - Tempo 2 - 4 h -
Temperatura di fusione 200 - 220 °C -
Temperatura dello stampo 40 - 80 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Granuli
Additivi
Agente di distacco
Caratteristiche speciali
Ritardante di fiamma
Disponibilità geografica
Altre informazioni
Stampaggio ad Iniezione
PREPROCESSING; Pretreatment
Predrying usually not neccessary (2-4h / 80°C)

PROCESSING ;Processing:

Melttemperature200 - 220°C
Mouldtemperature40 - 80°C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.