Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of PLEXIGLAS® Optical POQ64 - PMMA - Röhm GmbH
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces
Check here, which other Plexiglas datasheets, application examples or technical articles are available in Material Data Center
Productprofil:
PLEXIGLAS® Optical POQ64 is an amorphous thermoplastic molding compound based on polymethyl methacrylate (PMMA).
In addition to the familiar properties of PLEXIGLAS® molding compounds, such as
- excellent light transmission and brilliance,
- good weather resistance,
- high mechanical strength, surface hardness and mar resistance,
PLEXIGLAS® Optical POQ64 is distinguished by its
- guaranteed purity and clarity,
- very good flow properties,
- optimised mold release behavior,
- high luminous efficiency in medium to long light paths.
Application:
PLEXIGLAS® Optical POQ64 is excellently suited for the injection molding or injection-compression molding of technical components to meet stringent optical requirements.
Example:
Small to medium-sized injection-molded or injection compression-molded lightguide panels for display applications, lightguides.
Processing:
PLEXIGLAS® Optical POQ64 can be processed on injection molding machines with conventional three-section screws for engineering thermoplastics.
Physical Form / Packaging:
PLEXIGLAS® Optical POQ64 is supplied as uniform pellets in big-bags; other packaging on request.
Caratteristiche Fisiche | Valore | Unitá | Norma del test | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Indice di fusione di volume, MVR | 9 | cm³/10min | ISO 1133 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Temperatura | 230 | °C | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Carico | 3.8 | kg | - |
Proprietà Meccaniche | Valore | Unitá | Norma del test | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Modulo a trazione | 3300 | MPa | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Carico unitario a rottura | 65 | MPa | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Deformazione a rottura | 3 | % | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Resistenza all'urto Charpy, +23°C | 20 | kJ/m² | ISO 179/1eU |
Proprietà Termiche | Valore | Unitá | Norma del test | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Temp.di inflessione sotto carico, 1.80 MPa | 97 | °C | ISO 75-1/-2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Temp.di rammollimento Vicat, B | 104 | °C | ISO 306 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Coeff.di dilatazione termica lin., parallelo | 65 | E-6/K | ISO 11359-1/-2 |
Proprietà Elettriche | Valore | Unitá | Norma del test | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Resistività volumica | >1E13 | Ohm*m | IEC 62631-3-1 |
Proprietà Ottiche | Valore | Unitá | Norma del test | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Trasmittanza luminosa | 92 | % | ISO 13468-1, -2 |
Altre Proprietà | Valore | Unitá | Norma del test |
Massa volumica | 1190 | kg/m³ | ISO 1183 |
Preparazione Provette | Valore | Unitá | Norma del test | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Parametri di stampaggio in acc. ISO | 8257 | - | ISO ....-2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stamp. ad Iniezione, temperatura dello stampo | 64 | °C | ISO 294 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stamp. ad Iniezione, velocità media d'iniezione | 195 | mm/s | ISO 294 |
Predrying temperature: max. 90 °C
Predrying time in a desiccant-type drier: 2 - 3 h
PROCESSING
Melt temperature: 220 - 240°C
Mold temperature:60 - 90°C
Predrying temperature: max. 90 °C
Predrying time in a desiccant-type drier: 2 - 3 h
PROCESSING
Melt temperature: 220 - 240 °C
Die temperature: 220 - 240 °C
Predrying temperature: max. 90 °C
Predrying time in a desiccant-type drier: 2 - 3 h
PROCESSING
Melt temperature: 220 - 240 °C
Die temperature: 220 - 240 °C
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.