Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Novodur® ECO HH-106 MR30 - ABS - INEOS Styrolution

Material Data Center offers the following functions for Novodur® ECO HH-106 MR30:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Novodur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Carbon Footprint Reduction vs Fossil-Based (3rd party validated): 23 % (ISO 14044)
Post-Consumer Recycled ABS Content (RecyClass-certified): 30 %
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 8 cm³/10min ISO 1133
Temperatura 220 °C -
Carico 10 kg -
Ritiro di stampaggio, parallelo 0.6 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 2800 MPa ISO 527
Carico unitario a trazione 48 MPa ISO 527
Deformazione a snervamento 2.6 % ISO 527
Deformazione nominale a rottura 16 % ISO 527
Carico unitario a rottura 40 MPa ISO 527
Modulo a flessione, 23°C 2800 MPa ISO 178
Resistenza alla flessione 80 MPa ISO 178
Resistenza all'urto Charpy, +23°C 60 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 50 kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 10 kJ/m² ISO 179/1eA
Resist. urto Charpy con intaglio, -30°C 5 kJ/m² ISO 179/1eA
Ball indentation hardness 120 MPa ISO 2039-1
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 100[ann.] °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 106[ann.] °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 106 °C ISO 306
ann.: annealed
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1050 kg/m³ ISO 1183
Bulk density 600 kg/m³ -
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 80 °C -
Pre-essiccamento - Tempo 2 - 4 h -
Temperatura di fusione 230 - 260 °C -
Temperatura dello stampo 60 - 80 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet
Caratteristiche speciali
Stabilizzato o stabile al calore
Certifications
Contenuto di resina riciclata
Applicazioni
Automotive, Elettrotecnica ed electrici
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.