Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin PCN2910 - Asia - (PPE+PS)-(GF+P)35 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin PCN2910 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
NORYL™ PCN2910 resin is a 35% glass/mica filled blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This high modulus, injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VB at 2.3mm, V0 at 3mm, and V1 at 1.5mm. NORYL PCN2910 resin exhibits good dimensional stability, low specific gravity, and Low Warpage. It is an excellent candidate for printer chassis applications where high modulus and tight tolerance molding are required.

UL Yellow Card Link E45587-237063
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 11 g/10min ASTM D 1238
Temperatura 300 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 10600 MPa ISO 527
Carico unitario a trazione 106 MPa ISO 527
Deformazione a rottura 1.3 % ISO 527
Modulo a flessione 9130 MPa ISO 178
Resistenza all'urto Charpy, +23°C 20 kJ/m² ISO 179/1eU
Izod impact strength, +23°C, 4mm 14 kJ/m² ISO 180/1U
Resist. urto Izod con intaglio, +23°C, 4mm 5 kJ/m² ISO 180/1A
ASTM Data
Modulo a trazione 11370 MPa ASTM D 638
Resistenza alla trazione di snervamento 123 MPa ASTM D 638
Allungamento a rottura 1.5 % ASTM D 638
Resistenza all'urto Izod con intaglio, 1/8 in 68 J/m ASTM D 256
Resistenza all'urto Izod, 1/8 in 331 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 129 °C ISO 75-1/-2
Reaz. al fuoco spess.nom. 1.5mm V-1 class IEC 60695-11-10
Spessore provato 1.5 mm -
Reazione al fuoco a spessore h V-0 class IEC 60695-11-10
Spessore provato 3.0 mm -
Reazione al fuoco 5V a spess. h 5VB class IEC 60695-11-20
Spessore provato 2.3 mm -
ASTM Data
Temp.di rammollimento Vicat 140 °C ASTM D 1525
Altre ProprietàValoreUnitáNorma del test
Densità 1380 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 105 - 110 °C -
Pre-essiccamento - Tempo 3 - 4 h -
Umidità del Processo ≤0.02 % -
Temperatura di fusione 295 - 315 °C -
Temperatura dello stampo 75 - 105 °C -
Zona 1 260 - 305 °C -
Zona 2 270 - 310 °C -
Zona 3 280 - 315 °C -
Velocità di Rotazione della Vite 20 - 100 rpm -
Contropressione 0.3 - 0.7 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Additivi
Agente ritardante di fiamma
Caratteristiche speciali
Ritardante di fiamma
Disponibilità geografica
Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.