Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin HMC1010 - (PPE+PS)-CF10 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin HMC1010:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
NORYL HMC1010 compound is based on Polyphenylene Ether (PPE) resin containing 10% carbon fiber. Added features of this grade include: Electrically Conductive, Non-Chlorinated, Non-Brominated Flame Retardant.

UL Yellow Card Link E121562-221166
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Resistenza alla trazione di snervamento 79 MPa ASTM D 638
Resistenza alla trazione a rottura 71 MPa ASTM D 638
Allungamento a rottura 3 % ASTM D 638
Durezza Rockwell R 122 - ASTM D 785
Taber abrasione resistenza 83 mg/1000 cycles ASTM D 1044
Resistenza all'urto Izod con intaglio, 1/8 in 69 J/m ASTM D 256
Resistenza all'urto Izod, 1/8 in 240 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Reazione al fuoco a spessore h V-1 class IEC 60695-11-10
Spessore provato 2.0 mm -
Reazione al fuoco 5V a spess. h 5VA class IEC 60695-11-20
Spessore provato 2.0 mm -
Proprietà ElettricheValoreUnitáNorma del test
ASTM Data
Resistenza superficiale 13000 Ohm ASTM D 257
Resistenza di volume 8000 Ohm*cm ASTM D 257
Altre ProprietàValoreUnitáNorma del test
Densità 1150 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 90 - 95 °C -
Pre-essiccamento - Tempo 3 - 4 h -
Umidità del Processo ≤0.02 % -
Temperatura di fusione 255 - 280 °C -
Temperatura dello stampo 65 - 90 °C -
Zona 1 220 - 270 °C -
Zona 2 230 - 275 °C -
Zona 3 245 - 280 °C -
Velocità di Rotazione della Vite 20 - 100 rpm -
Contropressione 0.3 - 0.7 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Additivi
Agente ritardante di fiamma
Caratteristiche speciali
Migliorata conduttività elettrica, Ritardante di fiamma
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.