Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX918W - Americas - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

NORYL GTX™ 918W resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits high heat resistance, excellent chemical resistance, and high melt flow. NORYL GTX918W resin may be an excellent candidate for automotive under-the-hood and electrical applications requiring the retention of properties while under thermal load.

Caratteristiche Fisiche	Valore	Unitá	Norma del test
ISO Data
Densità del fuso	924	kg/m³	-
Conduttività termica del fuso	0.21	W/(m K)	-
Capacità termica specifica del fuso	1920	J/(kg K)	-
Temperatura di estrazione	200	°C	-

Proprietà Meccaniche	Valore	Unitá	Norma del test
ASTM Data
Resistenza alla trazione di snervamento	62	MPa	ASTM D 638
Allungamento a rottura	53	%	ASTM D 638
Modulo a flessione	2360	MPa	ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in	202	J/m	ASTM D 256

Proprietà Termiche	Valore	Unitá	Norma del test
ISO Data
Coeff.di dilatazione termica lin., parallelo	80	E-6/K	ISO 11359-1/-2
Coeff.di dilatazione termica lin. , perpend.	80	E-6/K	ISO 11359-1/-2
ASTM Data
DTUL a 66 psi	188	°C	ASTM D 648
DTUL a 264 psi	148	°C	ASTM D 648

Altre Proprietà	Valore	Unitá	Norma del test
Densità	1090	kg/m³	ASTM D 792

Raccomandazione de Processabilità Stampaggio ad Iniezione	Valore	Unitá	Norma del test
Pre-essiccamento - Temperatura	95 - 105	°C	-
Pre-essiccamento - Tempo	3 - 4	h	-
Umidità del Processo	≤0.07	%	-
Temperatura di fusione	270 - 295	°C	-
Temperatura dello stampo	65 - 95	°C	-
Zona 1	255 - 295	°C	-
Zona 2	260 - 295	°C	-
Zona 3	265 - 295	°C	-
Velocità di Rotazione della Vite	20 - 100	rpm	-
Contropressione	0.3 - 1.4	MPa	-

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione

Applicazioni

Automotive

Disponibilità geografica

Nord America

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.