Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makroblend® M525 - (PC+PBT)-I - Covestro Deutschland AG

Material Data Center offers the following functions for Makroblend® M525:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Makroblend datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
  • (PC PBT) Blend, impact modified, easy release, injection molding grade. Makroblend M525 offers an exceptional low-temperature impact strength, good flowability and excellent chemical resistance. Manufactured according to GMP, tested only according to ISO 10993-5 and ISO 10993-10 for contact with uncompromised skin only
  • for questions regarding biocompatibility we ask for an email inquiry under plastics@covestro.com.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 21 cm³/10min ISO 1133
Temperatura 260 °C -
Carico 5 kg -
Ritiro di stampaggio, parallelo 0.8 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 0.8 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 2000 MPa ISO 527
Carico unitario a trazione 55 MPa ISO 527
Deformazione a snervamento 4.5 % ISO 527
Deformazione nominale a rottura >50 % ISO 527
Modulo a flessione, 23°C 2000 MPa ISO 178
Resistenza all'urto Izod con intaglio, +23°C 60 kJ/m² ISO 180/1A
Resistenza all'urto Izod con intaglio 45 kJ/m² ISO 180/1A
Temperatura -20 °C -
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 75 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 100 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 122 °C ISO 306
Reaz. al fuoco spess.nom. 1.5mm HB class IEC 60695-11-10
Spessore provato 1.5 mm -
Yellow Card disponibile sì - -
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Resistività volumica >1E13 Ohm*m IEC 62631-3-1
Resistività superficiale >1E15 Ohm IEC 62631-3-2
Res. Alle correnti striscianti superficiali 225 - IEC 60112
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1220 kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 110 °C -
Pre-essiccamento - Tempo 2 - 4 h -
Umidità del Processo ≤0.01 % -
Temperatura di fusione 250 - 270 °C -
Temperatura dello stampo 60 - 100 °C -
Zona 1 245 - 255 °C -
Zona 2 250 - 260 °C -
Zona 3 255 - 265 °C -
Temperatura dell ugello 255 - 270 °C -
Contropressione 5 - 15 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Additivi
Agente di distacco
Caratteristiche speciali
Alto urto o modificato all'urto
Resistenza Chimica
Resistenza chimica generale
Certifications
Grado medico, Biocompatibility ISO 10993
Applicazioni
Medicale
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.