Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of MAGNUM™ 3325 MT - ABS - Trinseo

Material Data Center offers the following functions for MAGNUM™ 3325 MT:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Magnum datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 11 cm³/10min ISO 1133
Temperatura 220 °C -
Carico 10 kg -
Indice di Fluiditá, MFI 10 g/10min ISO 1133
Temperatura 220 °C -
Carico 10 kg -
Ritiro di stampaggio, parallelo 0.6 % ISO 294-4, 2577
ASTM Data
Indice di fluidità a caldo, MFI 2.5 g/10min ASTM D 1238
Temperatura 230 °C -
Carico 3.8 kg -
Ritiro di stampaggio, parallelo 0.0055 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 2200 MPa ISO 527
Carico unitario a trazione 43 MPa ISO 527
Deformazione a snervamento 3.3 % ISO 527
Modulo a flessione, 23°C 2100 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 17 kJ/m² ISO 179/1eA
Resist. urto Charpy con intaglio, -30°C 11 kJ/m² ISO 179/1eA
Resistenza all'urto Izod con intaglio, +23°C 17 kJ/m² ISO 180/1A
Resistenza all'urto Izod con intaglio 10 kJ/m² ISO 180/1A
Temperatura -30 °C -
ASTM Data
Modulo a trazione 2068 MPa ASTM D 638
Resistenza alla trazione di snervamento 42.3 MPa ASTM D 638
Allungamento a rottura 25 % ASTM D 638
Modulo a flessione 2206 MPa ASTM D 790
Resistenza alla flessione 64.5 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 310 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di rammollimento Vicat, B 102 °C ISO 306
Reaz. al fuoco spess.nom. 1.5mm HB class IEC 60695-11-10
Spessore provato 1.5 mm -
Reazione al fuoco a spessore h HB class IEC 60695-11-10
Spessore provato 3.0 mm -
ASTM Data
UL 94 combustibilitá HB - UL 94
Spessore testati 1.5 mm -
coefficiente d’espansione termica, lung. 93.6 E-6/K ASTM D 696
DTUL a 66 psi 96.1 °C ASTM D 648
DTUL a 264 psi 82.8 °C ASTM D 648
Temp.di rammollimento Vicat 108 °C ASTM D 1525
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1050 kg/m³ ISO 1183
Densità 1040 kg/m³ ASTM D 792
Caratteristiche
Caratteristiche
Stabilità del colore
Applicazioni
Automotive
Disponibilità geografica
Nord America, Asia Oceano Pacifico, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.