Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUPOX GP2300G - PBT-GF30 - LG Chem

Material Data Center offers the following functions for LUPOX GP2300G:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lupox datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Ritiro di stampaggio, parallelo 0.007 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Resistenza alla trazione a rottura 118 MPa ASTM D 638
Allungamento a rottura 3 % ASTM D 638
Modulo a flessione 7653 MPa ASTM D 790
Resistenza alla flessione 177 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 73.6 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
UL 94 combustibilitá HB - UL 94
Spessore testati 0.71 mm -
DTUL a 66 psi 215 °C ASTM D 648
DTUL a 264 psi 210 °C ASTM D 648
Temperatura di fusione 225 °C ASTM D 3418
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Res. Alle correnti striscianti superficiali 600 - IEC 60112
ASTM Data
Rigidità elettrica, breve periodo di tempo 23 kV/mm ASTM D 149
Resistenza di volume 1E16 Ohm*cm ASTM D 257
Altre ProprietàValoreUnitáNorma del test
Densità 1520 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 120 °C -
Pre-essiccamento - Tempo 4 - 5 h -
Umidità del Processo ≤0.02 % -
Temperatura di fusione 245 - 255 °C -
Temperatura dello stampo 60 - 100 °C -
Zona 1 235 - 250 °C -
Zona 2 240 - 250 °C -
Zona 3 245 - 255 °C -
Temperatura dell ugello 245 - 255 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Applicazioni
Elettrotecnica ed electrici, Refrigerazione
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.