Any use of this information falls under the rules of our
disclaimer.
Caratteristiche Fisiche | Valore | Unitá | Norma del test |
ASTM Data |
Indice di fluidità a caldo, MFI |
2 |
g/10min |
ASTM D 1238 |
Temperatura |
190 |
°C |
- |
Carico |
2.16 |
kg |
- |
Proprietà Meccaniche | Valore | Unitá | Norma del test |
Other Standards[S] |
Perforazione-forza massima, +23°C |
25 |
N |
ASTM D 5748 |
Energia di perforazione, +23°C |
1.6 |
J |
ASTM D 5748 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
Proprietà Termiche | Valore | Unitá | Norma del test |
ASTM Data |
Temperatura di fusione |
121 |
°C |
ASTM D 3418 |
Temp.di rammollimento Vicat |
100 |
°C |
ASTM D 1525 |
Proprietà Ottiche | Valore | Unitá | Norma del test |
ASTM Data |
Brillantezza |
92 |
- |
ASTM D 2457 |
Opacità |
1.8 |
% |
ASTM D 1003 |
Altre Proprietà | Valore | Unitá | Norma del test |
Densità |
918 |
kg/m³ |
ASTM D 792 |
Proprietà Meccaniche (Film) | Valore | Unitá | Norma del test |
ASTM Data |
Resistenza alla trazione di snervamento, lung. |
9.7 |
MPa |
ASTM D 882 |
Resistenza alla trazione di snervamento, tras. |
9.6 |
MPa |
ASTM D 882 |
Resistenza alla trazione a rottura, lung. |
37 |
MPa |
ASTM D 882 |
Resistenza alla trazione a rottura, tras. |
23 |
MPa |
ASTM D 882 |
Allungamento a rottura, lung. |
330 |
% |
ASTM D 882 |
Allungamento a rottura, tras. |
670 |
% |
ASTM D 882 |
Tipo di estrusione |
cast |
- |
- |
Spessore del provino |
0.02 |
mm |
- |
Raccomandazione de Processabilità Estrusione | Valore | Unitá | Norma del test |
Temperatura di fusione |
220 - 250 |
°C |
- |
Zona 1 |
180 - 270 |
°C |
- |
Caratteristiche
Processabilità e Forma di Forni
Estrusione Film
Caratteristiche
Miscela di resina, Stabilità termica
Certifications
Contatto con gli alimenti
Applicazioni
Imballaggio
Disponibilità geografica
Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com