Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ VISUALFX™ Resin FXM171R Americas - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ VISUALFX™ Resin FXM171R Americas:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
PC in special effects colors.  Metallic and pearlescent additives. Color may affect performance.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 25 g/10min ASTM D 1238
Temperatura 300 °C -
Carico 1.2 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Modulo a trazione 2340 MPa ASTM D 638
Resistenza alla trazione di snervamento 62 MPa ASTM D 638
Resistenza alla trazione a rottura 48 MPa ASTM D 638
Allungamento a snervamento 6.2 % ASTM D 638
Allungamento a rottura 60 % ASTM D 638
Modulo a flessione 2360 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 106 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Reazione al fuoco a spessore h V-2 class IEC 60695-11-10
Spessore provato 1.2 mm -
Yellow Card disponibile sì - -
ASTM Data
DTUL a 66 psi 136 °C ASTM D 648
DTUL a 264 psi 125 °C ASTM D 648
Altre ProprietàValoreUnitáNorma del test
Densità 1200 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 120 °C -
Pre-essiccamento - Tempo 3 - 4 h -
Umidità del Processo ≤0.02 % -
Temperatura di fusione 270 - 295 °C -
Temperatura dello stampo 70 - 95 °C -
Zona 1 250 - 270 °C -
Zona 2 260 - 280 °C -
Zona 3 270 - 295 °C -
Temperatura dell ugello 265 - 290 °C -
Velocità di Rotazione della Vite 40 - 70 rpm -
Contropressione 0.3 - 0.7 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche
Metallic effect
Applicazioni
Costruzione, Elettrotecnica ed electrici
Disponibilità geografica
Nord America, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.