Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ VISUALFX™ Resin FXG1414T - Americas - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ VISUALFX™ Resin FXG1414T - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
PC-siloxane copolymer in special "Diamond Sparkle" colors. Medium flow. Improved toughness compared to medium flow standard PC in same color. Color package may affect performance.

UL Yellow Card Link E121562-512743
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 9 cm³/10min ISO 1133
Temperatura 300 °C -
Carico 1.2 kg -
ASTM Data
Indice di fluidità a caldo, MFI 10 g/10min ASTM D 1238
Temperatura 300 °C -
Carico 1.2 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 2250 MPa ISO 527
Carico unitario a trazione 56 MPa ISO 527
Deformazione a snervamento 5.4 % ISO 527
Carico unitario a rottura 49 MPa ISO 527
Deformazione a rottura 11.3 % ISO 527
Modulo a flessione 2150 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 45 kJ/m² ISO 179/1eA
Resist. urto Izod con intaglio, +23°C, 4mm 32 kJ/m² ISO 180/1A
Resist. urto Izod con intaglio, -30°C, 4mm 19 kJ/m² ISO 180/1A
ASTM Data
Modulo a trazione 2060 MPa ASTM D 638
Resistenza alla trazione di snervamento 58 MPa ASTM D 638
Resistenza alla trazione a rottura 45 MPa ASTM D 638
Allungamento a snervamento 5.7 % ASTM D 638
Allungamento a rottura 52 % ASTM D 638
Modulo a flessione 2230 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 523 J/m ASTM D 256
Resistenza all'urto Izod con intaglio, basso temperatura 347 J/m ASTM D 256
Temperatura -30 °C -
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 117 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 139 °C ISO 306
Temp.di rammollimento Vicat, 120°C/h 50N 142 °C ISO 306
Reaz. al fuoco spess.nom. 1.5mm HB class IEC 60695-11-10
Spessore provato 1.5 mm -
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
Glow Wire Ignition Temperature (GWIT) 850 °C IEC 60695-2-13
GWIT - thickness tested (3) 3 mm -
ASTM Data
DTUL a 264 psi 121 °C ASTM D 648
Temp.di rammollimento Vicat 139 °C ASTM D 1525
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.13 % Sim. alla ISO 62
Assorbimento d'umidità 0.09 % Sim. alla ISO 62
Massa volumica 1180 kg/m³ ISO 1183
Densità 1180 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 120 °C -
Pre-essiccamento - Tempo 3 - 4 h -
Umidità del Processo ≤0.02 % -
Temperatura di fusione 295 - 315 °C -
Temperatura dello stampo 70 - 95 °C -
Zona 1 270 - 295 °C -
Zona 2 280 - 305 °C -
Zona 3 295 - 315 °C -
Velocità di Rotazione della Vite 40 - 70 rpm -
Contropressione 0.3 - 0.7 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.