Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ VISUALFX™ Resin FXE154 - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ VISUALFX™ Resin FXE154:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Ottiche - Altre Proprietà - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
FDA compliant (color limited) PC.  2.5 MFR.  Potable water/extrusion blowmoldable.  ILLUMINATE special effects (fluorescent/edge glow colors).
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 2.5 g/10min ASTM D 1238
Temperatura 300 °C -
Carico 1.2 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Resistenza alla trazione di snervamento 62 MPa ASTM D 638
Resistenza alla trazione a rottura 65 MPa ASTM D 638
Allungamento a snervamento 7 % ASTM D 638
Allungamento a rottura 110 % ASTM D 638
Modulo a flessione 2340 MPa ASTM D 790
Durezza Rockwell R 118 - ASTM D 785
Taber abrasione resistenza 10 mg/1000 cycles ASTM D 1044
Resistenza all'urto Izod con intaglio, 1/8 in 747 J/m ASTM D 256
Resistenza all'urto Izod, 1/8 in 3200 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Reazione al fuoco a spessore h HB class IEC 60695-11-10
Spessore provato 0.8 mm -
Yellow Card disponibile sì - -
ASTM Data
coefficiente d’espansione termica, lung. 68.4 E-6/K ASTM D 696
DTUL a 66 psi 137 °C ASTM D 648
DTUL a 264 psi 132 °C ASTM D 648
Temp.di rammollimento Vicat 157 °C ASTM D 1525
Conduttività termica, stato solido 0.0274 W/(m K) ASTM C 177
Temperatura specifica 1250 J/(kg K) ASTM C 351
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Opacità 1 % ASTM D 1003
Trasmissione luminosa 88 % ASTM D 1003
Indice di rifrazione 1.59 - ASTM D 542
Altre ProprietàValoreUnitáNorma del test
Assorbimento d’acqua, 24hr 0.15 % ASTM D 570
Assorbimento d’acqua, equilibrio 0.58 % ASTM D 570
Densità 1190 kg/m³ ASTM D 792
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 115 - 120 °C -
Pre-essiccamento - Tempo 4 - 6 h -
Umidità del Processo ≤0.02 % -
Temperatura di fusione 265 - 275 °C -
Temperatura dello stampo 65 - 95 °C -
Zona 1 260 - 275 °C -
Zona 2 260 - 275 °C -
Zona 3 260 - 275 °C -
Zona 4 260 - 275 °C -
Zona 5 260 - 275 °C -
Temperatura dell ugello 270 - 280 °C -
Caratteristiche
Processabilità e Forma di Forni
Altre Estrusioni, Soffiaggio
Certifications
Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti secondo la FDA 21 CFR
Applicazioni
Elettrotecnica ed electrici, Imballaggio
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.