Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ VISUALFX™ Resin FXE154 - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ VISUALFX™ Resin FXE154:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés optiques - Propriétés diverses - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Informations produit
FDA compliant (color limited) PC.  2.5 MFR.  Potable water/extrusion blowmoldable.  ILLUMINATE special effects (fluorescent/edge glow colors).
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 2.5 g/10min ASTM D 1238
Température 300 °C -
Charge 1.2 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module de traction d’élasticité 62 MPa ASTM D 638
Résistance de traction à la rupture 65 MPa ASTM D 638
Allongement d’élasticité 7 % ASTM D 638
Allongement à la rupture 110 % ASTM D 638
Module de flexion 2340 MPa ASTM D 790
Dureté Rockwell R 118 - ASTM D 785
Taber abrasion résistance 10 mg/1000 cycles ASTM D 1044
Izod choc avec entaille, 1/8 in 747 J/m ASTM D 256
Résistance au choc Izod, 1/8 in 3200 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Inflammabilité pr. épaisseur h HB class IEC 60695-11-10
Epaisseur de l'éprouvette 0.8 mm -
Yellow Card disponible oui - -
ASTM Data
coefficient de dilatation thermique, long. 68.4 E-6/K ASTM D 696
DTUL à 66 psi 137 °C ASTM D 648
DTUL à 264 psi 132 °C ASTM D 648
Vicat température 157 °C ASTM D 1525
Conductivité thermique, l'état solide 0.0274 W/(m K) ASTM C 177
Chaleur spécifique 1250 J/(kg K) ASTM C 351
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Haze 1 % ASTM D 1003
Lumière á Transmittance 88 % ASTM D 1003
Indice de réfraction 1.59 - ASTM D 542
Propriétés diversesValeurUnitéNorme du test
Absorption d’eau, 24hr 0.15 % ASTM D 570
Absorption d’eau, équilibre 0.58 % ASTM D 570
Densité 1190 kg/m³ ASTM D 792
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Pré-séchage - température 115 - 120 °C -
Pré-séchage - temps 4 - 6 h -
L'humidité de traitement ≤0.02 % -
Température de la matière fondue 265 - 275 °C -
Température du moule 65 - 95 °C -
Zone 1 260 - 275 °C -
Zone 2 260 - 275 °C -
Zone 3 260 - 275 °C -
Zone 4 260 - 275 °C -
Zone 5 260 - 275 °C -
Température de la buse 270 - 280 °C -
Caractéristiques
Transformation
Extrusion (autres), Soufflage
Certifications
Contact alimentaire, FDA 21 CFR approbation
Applications
Électrotechnique et électrique, Emballage
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.