Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hylon® N1000THL HF - PA66 - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hylon® N1000THL HF:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hylon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 2.3 / * % ISO 294-4, 2577
ASTM Data
Ritiro di stampaggio, parallelo 0.018 mm/mm ASTM D 955
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Carico unitario a trazione 71 / - MPa ISO 527
Deformazione a rottura 30 / - % ISO 527
Modulo a flessione, 23°C 2320 / - MPa ISO 178
Resistenza all'urto Izod con intaglio, +23°C 17 / - kJ/m² ISO 180/1A
ASTM Data
Resistenza alla trazione di snervamento 70.3 / - MPa ASTM D 638
Allungamento a rottura 40 / - % ASTM D 638
Modulo a flessione 2240 / - MPa ASTM D 790
Resistenza alla flessione 79.3 / - MPa ASTM D 790
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 74 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 213 / * °C ISO 75-1/-2
ASTM Data
UL 94 combustibilitá HB - UL 94
Spessore testati 1.5 mm -
coefficiente d’espansione termica, lung. 110 E-6/K ASTM D 696
DTUL a 66 psi 229 °C ASTM D 648
DTUL a 264 psi 72 °C ASTM D 648
Proprietà Elettrichesecco/condUnitáNorma del test
ASTM Data
Rigidità elettrica, breve periodo di tempo 21 / - kV/mm ASTM D 149
Resistenza di volume >1E15 / - Ohm*cm ASTM D 257
Altre Proprietàsecco/condUnitáNorma del test
Massa volumica 1100 / - kg/m³ ISO 1183
Assorbimento d’acqua, 24hr 1.2 % ASTM D 570
Densità 1100 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet
Additivi
Lubrificanti
Caratteristiche speciali
Stabilizzato o stabile al calore
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.