Elastopor - PUR - BASF Polyurethanes GmbH

Kunststoffe international, 2010-01-27, Cool More Efficiently
...ient freezing. And this can be achieved only through perfect insulation of the respective refrigerated containers, boxes, halls, refrigerators and racks. It is precisely this necessary chilling that the specially developed polyurethane systems Elastopor H, Elastopir and Elastocool from Elastogran GmbH, Lemförde, Germany, provide. There is a wide variety of materials that can be used for refrigerated transportation. On the basis of previous standards, their capabilities were quite sufficient. Now...

Kunststoffe international, 2010-09-24, A Material Unlimited
...ket prevents any tendency to float. Some 200,000 pipe segments thus have to be welded together automatically on board the lay barges (Fig. 1) and protected against corrosion and other influences in the vicinity of the weld seam. For this task, an Elastopor H open-cell polyurethane hard-foam was selected, which is optimized on board for strength and processibility. It had to be set open-cell in order for it to fill up with water and not create buoyancy. The helical shape of the polyurethane spira...

Kunststoffe international, 2012-06-25, A “Cool” Future
...energy efficiency by up to 4 %. Balindur thus also facilitates greater design freedom and more flexible production processes. Lower Energy Consumption Thanks to its very low density and high compression resistance, the open-cell PU foam Elastopor H is particularly suitable as the core material for VIPs. It can be produced in precisely contoured panel form and is easier to process than other basic material. The PU rigid foam is also simple to recycle. This is a genuine advantage and also a contri...