Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DUREZ SUMIKON PM-6430 - PF-(GF+MX) - Sumitomo Bakelite North America

Material Data Center offers the following functions for DUREZ SUMIKON PM-6430:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Durez datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Ritiro di stampaggio, parallelo 0.0005 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Modulo a trazione 15200 MPa ASTM D 638
Resistenza alla trazione 103 MPa ASTM D 638
Resistenza a compressione 179 MPa ASTM D 695
Resistenza alla flessione 117 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 32 J/m ASTM D 256
Proprietà ElettricheValoreUnitáNorma del test
ASTM Data
Rigidità elettrica, breve periodo di tempo 11.8 kV/mm ASTM D 149
Rigidità dielettrica, step/step 10.6 kV/mm ASTM D 149
Fattore di dissipazione dielèttrica, 1 MHz 0.02 - ASTM D 150
Costante dielèttrica, 1 MHz 4.6 - ASTM D 150
Resistenza di volume 1E13 Ohm*cm ASTM D 257
Altre ProprietàValoreUnitáNorma del test
Densità 1850 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Stampaggio a Trasferimento, Stampaggio a compressione
Forma fisica disponibile
Granuli, Nero
Caratteristiche speciali
Stabilizzato o stabile al calore
Applicazioni
Elettrotecnica ed electrici
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.