Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DURACON® TR-10D - POM-MX10 - Polyplastics

Material Data Center offers the following functions for DURACON® TR-10D:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Duracon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 31 cm³/10min ISO 1133
Temperatura 190 °C -
Carico 2.16 kg -
Indice di Fluiditá, MFI 39 g/10min ISO 1133
Temperatura 190 °C -
Carico 2.16 kg -
Ritiro di stampaggio, parallelo 1.8 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 1.8 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 3700 MPa ISO 527
Resistenza a trazione 57 MPa ISO 527
Deformazione a rottura 5 % ISO 527
Modulo a flessione, 23°C 3500 MPa ISO 178
Resistenza alla flessione 90 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 3.3 kJ/m² ISO 179/1eA
Durezza Rockwell M 90 - ISO 2039-2
ASTM Data
Resistenza alla trazione 55 MPa ASTM D 638
Modulo a flessione 3430 MPa ASTM D 790
Resistenza alla flessione 93 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 32.7 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 112 °C ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo 90 E-6/K ISO 11359-1/-2
Coeff.di dilatazione termica lin. , perpend. 90 E-6/K ISO 11359-1/-2
Reazione al fuoco a spessore h HB class IEC 60695-11-10
Yellow Card disponibile sì - -
ASTM Data
DTUL a 264 psi 142 °C ASTM D 648
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Resistività volumica 3E12 Ohm*m IEC 62631-3-1
Resistività superficiale 2E16 Ohm IEC 62631-3-2
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1480 kg/m³ ISO 1183
Densità 1480 kg/m³ ASTM D 792
Caratteristiche
Caratteristiche
Resistenza al scorrimento, Bassa deformazione
Disponibilità geografica
Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.