Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Delrin® 100ALE NC010 - POM-Z - DuPont Engineering Polymers

Check here, which other Delrin datasheets, application examples or technical articles are available in Material Data Center

Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.

Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.

Delrin® 100ALE is a high viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. It contains an advanced system of lubrication designed for low wear, low friction, and low noise against metals and plastics. 

Caratteristiche Fisiche	Valore	Unitá	Norma del test
ISO Data
Ritiro di stampaggio, parallelo	2.0	%	ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare	1.7	%	ISO 294-4, 2577

Proprietà Meccaniche	Valore	Unitá	Norma del test
ISO Data
Modulo a trazione	3000	MPa	ISO 527
Carico unitario a trazione	70	MPa	ISO 527
Deformazione a snervamento	18	%	ISO 527
Deformazione nominale a rottura	40	%	ISO 527
Resistenza all'urto Charpy, +23°C	N	kJ/m²	ISO 179/1eU
Resistenza all'urto Charpy, -30°C	200	kJ/m²	ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C	10.5	kJ/m²	ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C	8	kJ/m²	ISO 179/1eA

Proprietà Termiche	Valore	Unitá	Norma del test
ISO Data
Temperatura di fusione, 10°C/min	178	°C	ISO 11357-1/-3
Reaz. al fuoco spess.nom. 1.5mm	HB	class	IEC 60695-11-10
Spessore provato	1.5	mm	-
Yellow Card disponibile	sì	-	-
Reazione al fuoco a spessore h	HB	class	IEC 60695-11-10
Spessore provato	0.8	mm	-
Yellow Card disponibile	sì	-	-

Altre Proprietà	Valore	Unitá	Norma del test
Massa volumica	1400	kg/m³	ISO 1183

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione, Estrusione Profilati, Estrusione di Lastre/Fogli, Altre Estrusioni

Forma fisica disponibile

Pellet, Colore naturale

Additivi

Lubrificanti, Agente di distacco

Caratteristiche

Low Emission, Grado tribologico, Omopolimero

Applicazioni

Automotive

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.