Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ATTANE™ SL 4102G - (PE-VLD) - The Dow Chemical Company

Material Data Center offers the following functions for ATTANE™ SL 4102G:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Attane datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Ottiche - Altre Proprietà - Proprietà Meccaniche (Film)
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 1 g/10min ISO 1133
Temperatura 190 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
Other Standards[S]
Durezza Shore D 40 - DIN 53505
S: These properties are reported by the producer according standards that are different to our defaults.
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
Temperatura di fusione 122 °C ASTM D 3418
Temp.di rammollimento Vicat 84 °C ASTM D 1525
Proprietà OtticheValoreUnitáNorma del test
ISO Data
Opacità 7 - ISO 14782
ASTM Data
Brillantezza 78 - ASTM D 2457
Altre ProprietàValoreUnitáNorma del test
Densità 905 kg/m³ ASTM D 792
Proprietà Meccaniche (Film)ValoreUnitáNorma del test
ISO Data
Carico allo snervamento, parallelo 5.7 MPa ISO 527-3
Carico allo snervamento, normal 5.4 MPa ISO 527-3
Carico unitario a rottura, parallelo 33 MPa ISO 527-3
Carico unitario a rottura, perpend. 30 MPa ISO 527-3
Allungamento massimo, parallelo 670 % ISO 527-3
Allungamento massimo, perpend. 790 % ISO 527-3
Prova di caduta del dardo B 850 g ISO 7765-1
Tipo di estrusione blown - -
Spessore del provino 0.04 mm -
Caratteristiche
Processabilità e Forma di Forni
Estrusione di film in bolla, Estrusione Film
Forma fisica disponibile
Pellet, Bianco
Caratteristiche
Termosaldatura, Basso odore, Copolimero, Copolimero di ottene
Certifications
Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti 10/2011, Approvato per l'utilizzo per contatto con alimenti secondo la FDA 21 CFR, Food contact notification (FCN)
Applicazioni
Medicale, Imballaggio
Disponibilità geografica
Europa, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.