Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Armamid® PA6 GF 25-1FR - PA6-GF25 - R&P Polyplastic

Material Data Center offers the following functions for Armamid® PA6 GF 25-1FR:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Armamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 8 g/10min ISO 1133
Temperatura 250 °C -
Carico 2.16 kg -
Ritiro di stampaggio, parallelo 0.2 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 0.6 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Resistenza a trazione 125 MPa ISO 527
Deformazione a rottura 180 % ISO 527
Resistenza all'urto Charpy, +23°C 36 kJ/m² ISO 179/1eU
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 218 °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 192 °C ISO 75-1/-2
ASTM Data
UL 94 combustibilitá V-0 - UL 94
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Resistività volumica 1E13 Ohm*m IEC 62631-3-1
Rigidità dielettrica 23 kV/mm IEC 60243-1
Res. Alle correnti striscianti superficiali 350 - IEC 60112
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1590 kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Temperatura di fusione 240 °C -
Temperatura dello stampo 80 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche speciali
Ritardante di fiamma
Resistenza Chimica
Resistenza all'acido, Resistenza agli alcali, Resistenza ai solventi, Resistenza all’olio
Certifications
RoHS
Applicazioni
Aereo e aerospaziale, Automotive, Elettrotecnica ed electrici
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.