Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Amilan® CM3001-N - PA66 - Toray Industries, Inc.

Material Data Center offers the following functions for Amilan® CM3001-N:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Amilan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Conduttività termica del fuso 0.32 W/(m K) -
Capacità termica specifica del fuso 2100 J/(kg K) -
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Resistenza a trazione 80 / 50 MPa ISO 527
Deformazione a snervamento 1.5 / - % ISO 527
Deformazione a rottura 25 / 50 % ISO 527
Modulo a flessione, 23°C 2800 / 1400 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 4 / 23.5 kJ/m² ISO 179/1eA
Durezza Rockwell R 119 - ISO 2039-2
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 265 / * °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 0.45 MPa 220 / * °C ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo 95 / * E-6/K ISO 11359-1/-2
Reazione al fuoco a spessore h V-2 / * class IEC 60695-11-10
Spessore provato 0.4 / * mm -
Proprietà Elettrichesecco/condUnitáNorma del test
ISO Data
Costante dielettrica relativa, 1MHz 3.3 / 3.8 - IEC 62631-2-1
Fattore di dissipazione, 1MHz 200 / 700 E-4 IEC 62631-2-1
Resistività volumica 1E13 / 1E11 Ohm*m IEC 62631-3-1
Rigidità dielettrica 18 / - kV/mm IEC 60243-1
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 8 / * % Sim. alla ISO 62
Massa volumica 1140 / - kg/m³ ISO 1183
Caratteristiche
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.