Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin APS130 - (PPE+PPS)-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin APS130:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Informations produit
NORYL GTX™ APS130 resin is a 30% glass reinforced alloy of Polyphenylene Ether (PPE) + Polyphenylene Sulfide (PPS). This injection moldable grade has high stiffness, excellent chemical resistance, and high heat resistance. NORYL GTX APS130 resin is an excellent candidate for automotive under-the-hood applications such as ignition systems and electrical components.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 29.1 g/10min ASTM D 1238
Température 300 °C -
Charge 5 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 6640 MPa ISO 527
Contrainte à la rupture 120 MPa ISO 527
Déformation à la rupture 1.5 % ISO 527
Module de flexion 8110 MPa ISO 178
Résistance au choc Charpy, +23°C 59 kJ/m² ISO 179/1eU
Résistance au choc Charpy, -30°C 22 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), -30°C 6 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), +23°C, 3mm 21 kJ/m² ISO 179/1eA
ASTM Data
Module de flexion 8430 MPa ASTM D 790
Résistance à la flexion 156 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 88 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 0.45 MPa 264 °C ISO 75-1/-2
ASTM Data
DTUL à 66 psi 267 °C ASTM D 648
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Indice de résistance au cheminement 150 - IEC 60112
ASTM Data
Rigidité diélectrique, peu de temps 22.1 kV/mm ASTM D 149
Constante diélectrique, 60 Hz 3.3 - ASTM D 150
Résistance de la surface 1E16 Ohm ASTM D 257
Résistance volumique 1.2E17 Ohm*cm ASTM D 257
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1440 kg/m³ ISO 1183
Absorption d’eau, 24hr 0.02 % ASTM D 570
Densité 1440 kg/m³ ASTM D 792
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 120 - 150 °C -
Pré-séchage - temps 4 - 8 h -
L'humidité de traitement ≤0.02 % -
Température de la matière fondue 300 - 330 °C -
Température du moule 95 - 150 °C -
Zone 1 280 - 315 °C -
Zone 2 290 - 320 °C -
Zone 3 295 - 330 °C -
Vitesse de rotation de vis 50 - 100 rpm -
Contre-pression 0.7 - 1.4 MPa -
Caractéristiques
Transformation
Moulage par injection
Applications
Automobile
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.