Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin APS130 - (PPE+PPS)-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin APS130:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
NORYL GTX™ APS130 resin is a 30% glass reinforced alloy of Polyphenylene Ether (PPE) + Polyphenylene Sulfide (PPS). This injection moldable grade has high stiffness, excellent chemical resistance, and high heat resistance. NORYL GTX APS130 resin is an excellent candidate for automotive under-the-hood applications such as ignition systems and electrical components.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 29.1 g/10min ASTM D 1238
Temperature 300 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 6640 MPa ISO 527
Stress at break 120 MPa ISO 527
Strain at break 1.5 % ISO 527
Flexural modulus 8110 MPa ISO 178
Charpy impact strength, +23°C 59 kJ/m² ISO 179/1eU
Charpy impact strength, -30°C 22 kJ/m² ISO 179/1eU
Charpy notched impact strength, -30°C 6 kJ/m² ISO 179/1eA
Charpy notched impact strength, +23°C, 3mm 21 kJ/m² ISO 179/1eA
ASTM Data
Flexural Modulus 8430 MPa ASTM D 790
Flexural Strength 156 MPa ASTM D 790
Izod Impact notched, 1/8 in 88 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 0.45 MPa 264 °C ISO 75-1/-2
ASTM Data
DTUL @ 66 psi 267 °C ASTM D 648
Electrical propertiesValueUnitTest Standard
ISO Data
Comparative tracking index 150 - IEC 60112
ASTM Data
Dielectric Strength, Short Time 22.1 kV/mm ASTM D 149
Dielectric Constant, 60 Hz 3.3 - ASTM D 150
Surface Resistivity 1E16 Ohm ASTM D 257
Volume Resistivity 1.2E17 Ohm*cm ASTM D 257
Other propertiesValueUnitTest Standard
Density 1440 kg/m³ ISO 1183
Water Absorption, 24hr 0.02 % ASTM D 570
Density 1440 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 120 - 150 °C -
Pre-drying - Time 4 - 8 h -
Processing humidity ≤0.02 % -
Melt temperature 300 - 330 °C -
Mold temperature 95 - 150 °C -
Zone 1 280 - 315 °C -
Zone 2 290 - 320 °C -
Zone 3 295 - 330 °C -
Screw speed 50 - 100 rpm -
Back pressure 0.7 - 1.4 MPa -
Characteristics
Processing
Injection Molding
Applications
Automotive
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.