Any use of this information falls under the rules of our
disclaimer.
Caractéristiques des transformations/physiques | Valeur | Unité | Norme du test |
ASTM Data |
Indice de fluidité, MFI |
2 |
g/10min |
ASTM D 1238 |
Température |
190 |
°C |
- |
Charge |
2.16 |
kg |
- |
Propriétés mécaniques | Valeur | Unité | Norme du test |
Other Standards[S] |
Perforation - force maximum, +23°C |
25 |
N |
ASTM D 5748 |
Perforation - Energie, +23°C |
1.6 |
J |
ASTM D 5748 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
Propriétés thermiques | Valeur | Unité | Norme du test |
ASTM Data |
Température de fusion |
121 |
°C |
ASTM D 3418 |
Vicat température |
100 |
°C |
ASTM D 1525 |
Propriétés optiques | Valeur | Unité | Norme du test |
ASTM Data |
Brillant |
92 |
- |
ASTM D 2457 |
Haze |
1.8 |
% |
ASTM D 1003 |
Propriétés diverses | Valeur | Unité | Norme du test |
Densité |
918 |
kg/m³ |
ASTM D 792 |
Propriétés mécaniques (Grades film) | Valeur | Unité | Norme du test |
ASTM Data |
Module de traction d’élasticité, long. |
9.7 |
MPa |
ASTM D 882 |
Module de traction d’élasticité, trav. |
9.6 |
MPa |
ASTM D 882 |
Résistance de traction à la rupture, long. |
37 |
MPa |
ASTM D 882 |
Résistance de traction à la rupture, trav. |
23 |
MPa |
ASTM D 882 |
Allongement à la rupture, long. |
330 |
% |
ASTM D 882 |
Allongement à la rupture, trav. |
670 |
% |
ASTM D 882 |
Type d'extrusion |
cast |
- |
- |
Epaisseur des eprouvettes |
0.02 |
mm |
- |
Recommandations pour la transformation Extrusion | Valeur | Unité | Norme du test |
Température de la matière fondue |
220 - 250 |
°C |
- |
Zone 1 |
180 - 270 |
°C |
- |
Caractéristiques
Transformation
Extrusion de films
Caractéristiques
Mélange de résine, Stabilité thermique
Certifications
Contact alimentaire
Applications
Emballage
Disponibilité régionale
Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com