Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Antero™ 840CN03 - PEKK-Z3 - Stratasys Ltd.

Material Data Center offers the following functions for Antero™ 840CN03:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Antero datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés thermiques - Propriétés diverses - 3D Data
Any use of this information falls under the rules of our disclaimer.
Informations produit
Antero™ 840CN03 is a PEKK-based FDM thermoplastic with electrostatic dissipative (ESD) properties. The material is filled 3% by weight with carbon nanotubes.
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
DTUL à 66 psi 150 °C ASTM D 648
DTUL à 264 psi 153 °C ASTM D 648
Other Standards[S]
coefficient de dilatation thermique, long. 50.4 E-6/K ASTM E 831
Température de transition vitreuse 158 °C ASTM D 7426
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés diversesValeurUnitéNorme du test
Densité 1270 kg/m³ ASTM D 792
3D DataValeurUnitéNorme du test
Module en traction, on-edge 3170[1] MPa -
Module en traction, upright 3010[2] MPa -
Contrainte à la rupture, on-edge 65[1] MPa -
Contrainte à la rupture, upright 50[2] MPa -
Déformation à la rupture, on-edge 6[1] % -
Déformation à la rupture, upright 1.8[2] % -
Module de flexion, on-edge 3240[3] MPa -
Module de flexion, upright 2700[4] MPa -
1: XZ-direction; reference to ASTM D638   2: ZX-direction; reference to ASTM D638   3: XZ-direction; reference to ASTM D790  4: ZX-direction; reference to ASTM D790
Caractéristiques
Transformation
Additive Manufacturing
Conditionnement
Monofilament
Propriétés spéciales
Stabilisé à la chaleur
Résistance Chimique
Résistance chimique générale
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.